udisks_manager_proxy_new ()

void
udisks_manager_proxy_new (GDBusConnection *connection,
                          GDBusProxyFlags flags,
                          const gchar *name,
                          const gchar *object_path,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Manager. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_proxy_new_finish() to get the result of the operation.

See udisks_manager_proxy_new_sync() for the synchronous, blocking version of this constructor.

udisks_manager_proxy_new_finish ()

UDisksManager *
udisks_manager_proxy_new_finish (GAsyncResult *res,
                                 GError **error);

Finishes an operation started with udisks_manager_proxy_new().

udisks_manager_proxy_new_sync ()

UDisksManager *
udisks_manager_proxy_new_sync (GDBusConnection *connection,
                               GDBusProxyFlags flags,
                               const gchar *name,
                               const gchar *object_path,
                               GCancellable *cancellable,
                               GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Manager. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_manager_proxy_new() for the asynchronous version of this constructor.

udisks_manager_proxy_new_for_bus ()

void
udisks_manager_proxy_new_for_bus (GBusType bus_type,
                                  GDBusProxyFlags flags,
                                  const gchar *name,
                                  const gchar *object_path,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Like udisks_manager_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_manager_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

udisks_manager_proxy_new_for_bus_finish ()

UDisksManager *
udisks_manager_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_manager_proxy_new_for_bus().

udisks_manager_proxy_new_for_bus_sync ()

UDisksManager *
udisks_manager_proxy_new_for_bus_sync (GBusType bus_type,
                                       GDBusProxyFlags flags,
                                       const gchar *name,
                                       const gchar *object_path,
                                       GCancellable *cancellable,
                                       GError **error);

Like udisks_manager_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_manager_proxy_new_for_bus() for the asynchronous version of this constructor.

udisks_manager_interface_info ()

GDBusInterfaceInfo *
udisks_manager_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.Manager D-Bus interface.

udisks_manager_override_properties ()

guint
udisks_manager_override_properties (GObjectClass *klass,
                                    guint property_id_begin);

Overrides all GObject properties in the UDisksManager interface for a concrete class. The properties are overridden in the order they are defined.

udisks_manager_get_version ()

const gchar *
udisks_manager_get_version (UDisksManager *object);

Gets the value of the "Version" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_manager_dup_version() if on another thread.

[skip]

udisks_manager_dup_version ()

gchar *
udisks_manager_dup_version (UDisksManager *object);

Gets a copy of the "Version" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_manager_set_version ()

void
udisks_manager_set_version (UDisksManager *object,
                            const gchar *value);

Sets the "Version" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_manager_call_enable_module ()

void
udisks_manager_call_enable_module (UDisksManager *proxy,
                                   const gchar *arg_name,
                                   gboolean arg_enable,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the EnableModule() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_enable_module_finish() to get the result of the operation.

See udisks_manager_call_enable_module_sync() for the synchronous, blocking version of this method.

Since: 2.9.0

udisks_manager_call_enable_module_finish ()

gboolean
udisks_manager_call_enable_module_finish
                               (UDisksManager *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_manager_call_enable_module().

Since: 2.9.0

udisks_manager_call_enable_module_sync ()

gboolean
udisks_manager_call_enable_module_sync
                               (UDisksManager *proxy,
                                const gchar *arg_name,
                                gboolean arg_enable,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the EnableModule() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_enable_module() for the asynchronous version of this method.

Since: 2.9.0

udisks_manager_complete_enable_module ()

void
udisks_manager_complete_enable_module (UDisksManager *object,
                                       GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the EnableModule() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.9.0

udisks_manager_call_can_format ()

void
udisks_manager_call_can_format (UDisksManager *proxy,
                                const gchar *arg_type,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CanFormat() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_can_format_finish() to get the result of the operation.

See udisks_manager_call_can_format_sync() for the synchronous, blocking version of this method.

Since: 2.7.2

udisks_manager_call_can_format_finish ()

gboolean
udisks_manager_call_can_format_finish (UDisksManager *proxy,
                                       GVariant **out_available,
                                       GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_manager_call_can_format().

Since: 2.7.2

udisks_manager_call_can_format_sync ()

gboolean
udisks_manager_call_can_format_sync (UDisksManager *proxy,
                                     const gchar *arg_type,
                                     GVariant **out_available,
                                     GCancellable *cancellable,
                                     GError **error);

Synchronously invokes the CanFormat() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_can_format() for the asynchronous version of this method.

Since: 2.7.2

udisks_manager_complete_can_format ()

void
udisks_manager_complete_can_format (UDisksManager *object,
                                    GDBusMethodInvocation *invocation,
                                    GVariant *available);

Helper function used in service implementations to finish handling invocations of the CanFormat() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.2

udisks_manager_call_get_block_devices ()

void
udisks_manager_call_get_block_devices (UDisksManager *proxy,
                                       GVariant *arg_options,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the GetBlockDevices() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_get_block_devices_finish() to get the result of the operation.

See udisks_manager_call_get_block_devices_sync() for the synchronous, blocking version of this method.

Since: 2.7.2

udisks_manager_call_get_block_devices_finish ()

gboolean
udisks_manager_call_get_block_devices_finish
                               (UDisksManager *proxy,
                                gchar ***out_block_objects,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_manager_call_get_block_devices().

Since: 2.7.2

udisks_manager_call_get_block_devices_sync ()

gboolean
udisks_manager_call_get_block_devices_sync
                               (UDisksManager *proxy,
                                GVariant *arg_options,
                                gchar ***out_block_objects,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GetBlockDevices() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_get_block_devices() for the asynchronous version of this method.

Since: 2.7.2

udisks_manager_complete_get_block_devices ()

void
udisks_manager_complete_get_block_devices
                               (UDisksManager *object,
                                GDBusMethodInvocation *invocation,
                                const gchar *const *block_objects);

Helper function used in service implementations to finish handling invocations of the GetBlockDevices() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.2

udisks_manager_call_can_resize ()

void
udisks_manager_call_can_resize (UDisksManager *proxy,
                                const gchar *arg_type,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CanResize() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_can_resize_finish() to get the result of the operation.

See udisks_manager_call_can_resize_sync() for the synchronous, blocking version of this method.

Since: 2.7.2

udisks_manager_call_can_resize_finish ()

gboolean
udisks_manager_call_can_resize_finish (UDisksManager *proxy,
                                       GVariant **out_available,
                                       GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_manager_call_can_resize().

Since: 2.7.2

udisks_manager_call_can_resize_sync ()

gboolean
udisks_manager_call_can_resize_sync (UDisksManager *proxy,
                                     const gchar *arg_type,
                                     GVariant **out_available,
                                     GCancellable *cancellable,
                                     GError **error);

Synchronously invokes the CanResize() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_can_resize() for the asynchronous version of this method.

Since: 2.7.2

udisks_manager_complete_can_resize ()

void
udisks_manager_complete_can_resize (UDisksManager *object,
                                    GDBusMethodInvocation *invocation,
                                    GVariant *available);

Helper function used in service implementations to finish handling invocations of the CanResize() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.2

udisks_manager_call_can_check ()

void
udisks_manager_call_can_check (UDisksManager *proxy,
                               const gchar *arg_type,
                               GCancellable *cancellable,
                               GAsyncReadyCallback callback,
                               gpointer user_data);

Asynchronously invokes the CanCheck() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_can_check_finish() to get the result of the operation.

See udisks_manager_call_can_check_sync() for the synchronous, blocking version of this method.

Since: 2.7.2

udisks_manager_call_can_check_finish ()

gboolean
udisks_manager_call_can_check_finish (UDisksManager *proxy,
                                      GVariant **out_available,
                                      GAsyncResult *res,
                                      GError **error);

Finishes an operation started with udisks_manager_call_can_check().

Since: 2.7.2

udisks_manager_call_can_check_sync ()

gboolean
udisks_manager_call_can_check_sync (UDisksManager *proxy,
                                    const gchar *arg_type,
                                    GVariant **out_available,
                                    GCancellable *cancellable,
                                    GError **error);

Synchronously invokes the CanCheck() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_can_check() for the asynchronous version of this method.

Since: 2.7.2

udisks_manager_complete_can_check ()

void
udisks_manager_complete_can_check (UDisksManager *object,
                                   GDBusMethodInvocation *invocation,
                                   GVariant *available);

Helper function used in service implementations to finish handling invocations of the CanCheck() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.2

udisks_manager_call_can_repair ()

void
udisks_manager_call_can_repair (UDisksManager *proxy,
                                const gchar *arg_type,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CanRepair() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_can_repair_finish() to get the result of the operation.

See udisks_manager_call_can_repair_sync() for the synchronous, blocking version of this method.

Since: 2.7.2

udisks_manager_call_can_repair_finish ()

gboolean
udisks_manager_call_can_repair_finish (UDisksManager *proxy,
                                       GVariant **out_available,
                                       GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_manager_call_can_repair().

Since: 2.7.2

udisks_manager_call_can_repair_sync ()

gboolean
udisks_manager_call_can_repair_sync (UDisksManager *proxy,
                                     const gchar *arg_type,
                                     GVariant **out_available,
                                     GCancellable *cancellable,
                                     GError **error);

Synchronously invokes the CanRepair() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_can_repair() for the asynchronous version of this method.

Since: 2.7.2

udisks_manager_complete_can_repair ()

void
udisks_manager_complete_can_repair (UDisksManager *object,
                                    GDBusMethodInvocation *invocation,
                                    GVariant *available);

Helper function used in service implementations to finish handling invocations of the CanRepair() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.2

udisks_manager_call_loop_setup ()

void
udisks_manager_call_loop_setup (UDisksManager *proxy,
                                GVariant *arg_fd,
                                GVariant *arg_options,
                                GUnixFDList *fd_list,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the LoopSetup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_loop_setup_finish() to get the result of the operation.

See udisks_manager_call_loop_setup_sync() for the synchronous, blocking version of this method.

udisks_manager_call_loop_setup_finish ()

gboolean
udisks_manager_call_loop_setup_finish (UDisksManager *proxy,
                                       gchar **out_resulting_device,
                                       GUnixFDList **out_fd_list,
                                       GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_manager_call_loop_setup().

udisks_manager_call_loop_setup_sync ()

gboolean
udisks_manager_call_loop_setup_sync (UDisksManager *proxy,
                                     GVariant *arg_fd,
                                     GVariant *arg_options,
                                     GUnixFDList *fd_list,
                                     gchar **out_resulting_device,
                                     GUnixFDList **out_fd_list,
                                     GCancellable *cancellable,
                                     GError **error);

Synchronously invokes the LoopSetup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_loop_setup() for the asynchronous version of this method.

udisks_manager_complete_loop_setup ()

void
udisks_manager_complete_loop_setup (UDisksManager *object,
                                    GDBusMethodInvocation *invocation,
                                    GUnixFDList *fd_list,
                                    const gchar *resulting_device);

Helper function used in service implementations to finish handling invocations of the LoopSetup() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_manager_call_mdraid_create ()

void
udisks_manager_call_mdraid_create (UDisksManager *proxy,
                                   const gchar *const *arg_blocks,
                                   const gchar *arg_level,
                                   const gchar *arg_name,
                                   guint64 arg_chunk,
                                   GVariant *arg_options,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the MDRaidCreate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_mdraid_create_finish() to get the result of the operation.

See udisks_manager_call_mdraid_create_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_manager_call_mdraid_create_finish ()

gboolean
udisks_manager_call_mdraid_create_finish
                               (UDisksManager *proxy,
                                gchar **out_resulting_array,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_manager_call_mdraid_create().

Since: 2.0.0

udisks_manager_call_mdraid_create_sync ()

gboolean
udisks_manager_call_mdraid_create_sync
                               (UDisksManager *proxy,
                                const gchar *const *arg_blocks,
                                const gchar *arg_level,
                                const gchar *arg_name,
                                guint64 arg_chunk,
                                GVariant *arg_options,
                                gchar **out_resulting_array,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the MDRaidCreate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_mdraid_create() for the asynchronous version of this method.

Since: 2.0.0

udisks_manager_complete_mdraid_create ()

void
udisks_manager_complete_mdraid_create (UDisksManager *object,
                                       GDBusMethodInvocation *invocation,
                                       const gchar *resulting_array);

Helper function used in service implementations to finish handling invocations of the MDRaidCreate() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_manager_call_resolve_device ()

void
udisks_manager_call_resolve_device (UDisksManager *proxy,
                                    GVariant *arg_devspec,
                                    GVariant *arg_options,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the ResolveDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_manager_call_resolve_device_finish() to get the result of the operation.

See udisks_manager_call_resolve_device_sync() for the synchronous, blocking version of this method.

Since: 2.7.3

udisks_manager_call_resolve_device_finish ()

gboolean
udisks_manager_call_resolve_device_finish
                               (UDisksManager *proxy,
                                gchar ***out_devices,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_manager_call_resolve_device().

Since: 2.7.3

udisks_manager_call_resolve_device_sync ()

gboolean
udisks_manager_call_resolve_device_sync
                               (UDisksManager *proxy,
                                GVariant *arg_devspec,
                                GVariant *arg_options,
                                gchar ***out_devices,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the ResolveDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_manager_call_resolve_device() for the asynchronous version of this method.

Since: 2.7.3

udisks_manager_complete_resolve_device ()

void
udisks_manager_complete_resolve_device
                               (UDisksManager *object,
                                GDBusMethodInvocation *invocation,
                                const gchar *const *devices);

Helper function used in service implementations to finish handling invocations of the ResolveDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.3

udisks_manager_skeleton_new ()

UDisksManager *
udisks_manager_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.Manager.

UDisksManager

typedef struct _UDisksManager UDisksManager;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.Manager.

struct UDisksManagerIface

struct UDisksManagerIface {
  GTypeInterface parent_iface;

  gboolean (*handle_enable_modules) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_enable);

  gboolean (*handle_loop_setup) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    GUnixFDList *fd_list,
    GVariant *arg_fd,
    GVariant *arg_options);

  const gchar * (*get_default_encryption_type) (UDisksManager *object);

  const gchar *const * (*get_supported_encryption_types) (UDisksManager *object);

  const gchar *const * (*get_supported_filesystems) (UDisksManager *object);

  const gchar * (*get_version) (UDisksManager *object);

  gboolean (*handle_mdraid_create) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *const *arg_blocks,
    const gchar *arg_level,
    const gchar *arg_name,
    guint64 arg_chunk,
    GVariant *arg_options);

  gboolean (*handle_can_check) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type);

  gboolean (*handle_can_format) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type);

  gboolean (*handle_can_repair) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type);

  gboolean (*handle_can_resize) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type);

  gboolean (*handle_get_block_devices) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_resolve_device) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_devspec,
    GVariant *arg_options);

  gboolean (*handle_enable_module) (
    UDisksManager *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_name,
    gboolean arg_enable);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.Manager.

struct UDisksManagerProxy

struct UDisksManagerProxy;

The UDisksManagerProxy structure contains only private data and should only be accessed using the provided API.

struct UDisksManagerProxyClass

struct UDisksManagerProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksManagerProxy.

struct UDisksManagerSkeleton

struct UDisksManagerSkeleton;

The UDisksManagerSkeleton structure contains only private data and should only be accessed using the provided API.

struct UDisksManagerSkeletonClass

struct UDisksManagerSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksManagerSkeleton.

The “default-encryption-type” property

  “default-encryption-type”  char *

Represents the D-Bus property "DefaultEncryptionType".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksManager

Flags: Read / Write

Default value: NULL

The “supported-encryption-types” property

  “supported-encryption-types” GStrv

Represents the D-Bus property "SupportedEncryptionTypes".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksManager

Flags: Read / Write

The “supported-filesystems” property

  “supported-filesystems”    GStrv

Represents the D-Bus property "SupportedFilesystems".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksManager

Flags: Read / Write

The “version” property

  “version”                  char *

Represents the D-Bus property "Version".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksManager

Flags: Read / Write

Default value: NULL

The “handle-can-check” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_type,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CanCheck() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_can_check() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.2

The “handle-can-format” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_type,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CanFormat() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_can_format() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.2

The “handle-can-repair” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_type,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CanRepair() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_can_repair() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.2

The “handle-can-resize” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_type,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CanResize() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_can_resize() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.2

The “handle-enable-module” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_name,
               gboolean               arg_enable,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the EnableModule() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_enable_module() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.9.0

The “handle-enable-modules” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_enable,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the EnableModules() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_enable_modules() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-get-block-devices” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GetBlockDevices() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_get_block_devices() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.2

The “handle-loop-setup” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               GUnixFDList           *fd_list,
               GVariant              *arg_fd,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the LoopSetup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_loop_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-mdraid-create” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               GStrv                  arg_blocks,
               char                  *arg_level,
               char                  *arg_name,
               guint64                arg_chunk,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the MDRaidCreate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_mdraid_create() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-resolve-device” signal

gboolean
user_function (UDisksManager         *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_devspec,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ResolveDevice() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_manager_complete_resolve_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.7.3