udisks_daemon_new ()

UDisksDaemon *
udisks_daemon_new (GDBusConnection *connection,
                   gboolean disable_modules,
                   gboolean force_load_modules,
                   gboolean uninstalled,
                   gboolean enable_tcrypt);

Create a new daemon object for exporting objects on connection .

udisks_daemon_get_connection ()

GDBusConnection *
udisks_daemon_get_connection (UDisksDaemon *daemon);

Gets the D-Bus connection used by daemon .

udisks_daemon_get_object_manager ()

GDBusObjectManagerServer *
udisks_daemon_get_object_manager (UDisksDaemon *daemon);

Gets the D-Bus object manager used by daemon .

udisks_daemon_get_mount_monitor ()

UDisksMountMonitor *
udisks_daemon_get_mount_monitor (UDisksDaemon *daemon);

Gets the mount monitor used by daemon .

udisks_daemon_get_crypttab_monitor ()

UDisksCrypttabMonitor *
udisks_daemon_get_crypttab_monitor (UDisksDaemon *daemon);

Gets the crypttab monitor used by daemon .

udisks_daemon_get_linux_provider ()

UDisksLinuxProvider *
udisks_daemon_get_linux_provider (UDisksDaemon *daemon);

Gets the Linux Provider, if any.

udisks_daemon_get_authority ()

PolkitAuthority *
udisks_daemon_get_authority (UDisksDaemon *daemon);

Gets the PolicyKit authority used by daemon .

udisks_daemon_get_state ()

UDisksState *
udisks_daemon_get_state (UDisksDaemon *daemon);

Gets the state object used by daemon .

udisks_daemon_get_disable_modules ()

gboolean
udisks_daemon_get_disable_modules (UDisksDaemon *daemon);

Gets daemon setting whether modules should never be loaded.

udisks_daemon_get_force_load_modules ()

gboolean
udisks_daemon_get_force_load_modules (UDisksDaemon *daemon);

Gets daemon setting whether modules should be activated upon start.

udisks_daemon_get_module_manager ()

UDisksModuleManager *
udisks_daemon_get_module_manager (UDisksDaemon *daemon);

Gets the module manager used by daemon .

udisks_daemon_get_config_manager ()

UDisksConfigManager *
udisks_daemon_get_config_manager (UDisksDaemon *daemon);

Gets the config manager used by daemon .

udisks_daemon_get_enable_tcrypt ()

gboolean
udisks_daemon_get_enable_tcrypt (UDisksDaemon *daemon);

Gets daemon setting whether devices should be tested for being TCRYPT encrypted.

udisks_daemon_get_uninstalled ()

gboolean
udisks_daemon_get_uninstalled (UDisksDaemon *daemon);

Gets daemon setting whether the modules should be loaded from the build directory.

udisks_daemon_get_utab_monitor ()

UDisksUtabMonitor *
udisks_daemon_get_utab_monitor (UDisksDaemon *daemon);

Gets the utab monitor used by daemon .

udisks_daemon_get_parent_for_tracking ()

gchar *
udisks_daemon_get_parent_for_tracking (UDisksDaemon *daemon,
                                       const gchar *path,
                                       gchar **uuid);

Finds parent block device and returns its object path and UUID. If the return value is NULL, the value of uuid has not been changed.

UDisksDaemonWaitFuncGeneric ()

gpointer
(*UDisksDaemonWaitFuncGeneric) (UDisksDaemon *daemon,
                                gpointer user_data);

Type for callback function used with udisks_daemon_wait_for_object_sync().

udisks_daemon_wait_for_object_sync ()

UDisksObject *
udisks_daemon_wait_for_object_sync (UDisksDaemon *daemon,
                                    UDisksDaemonWaitFuncObject wait_func,
                                    gpointer user_data,
                                    GDestroyNotify user_data_free_func,
                                    guint timeout_seconds,
                                    GError **error);

Blocks the calling thread until an object picked by wait_func is available or until timeout_seconds has passed (in which case the function fails with UDISKS_ERROR_TIMED_OUT).

Note that wait_func will be called from time to time - for example if there is a device event.

udisks_daemon_get_objects ()

GList *
udisks_daemon_get_objects (UDisksDaemon *daemon);

Gets all D-Bus objects exported by daemon .

udisks_daemon_find_object ()

UDisksObject *
udisks_daemon_find_object (UDisksDaemon *daemon,
                           const gchar *object_path);

Finds an exported object with the object path given by object_path .

udisks_daemon_find_block ()

UDisksObject *
udisks_daemon_find_block (UDisksDaemon *daemon,
                          dev_t block_device_number);

Finds a block device with the number given by block_device_number .

udisks_daemon_find_block_by_device_file ()

UDisksObject *
udisks_daemon_find_block_by_device_file
                               (UDisksDaemon *daemon,
                                const gchar *device_file);

Finds a block device with device file given by device_file .

udisks_daemon_find_block_by_sysfs_path ()

UDisksObject *
udisks_daemon_find_block_by_sysfs_path
                               (UDisksDaemon *daemon,
                                const gchar *sysfs_path);

Finds a block device with a sysfs path given by sysfs_path .

udisks_daemon_launch_simple_job ()

UDisksBaseJob *
udisks_daemon_launch_simple_job (UDisksDaemon *daemon,
                                 UDisksObject *object,
                                 const gchar *job_operation,
                                 uid_t job_started_by_uid,
                                 GCancellable *cancellable);

Launches a new simple job.

The returned object will be exported on the bus until the “completed” signal is emitted on the object. It is not valid to use the returned object after this signal fires.

udisks_daemon_launch_spawned_job ()

UDisksBaseJob *
udisks_daemon_launch_spawned_job (UDisksDaemon *daemon,
                                  UDisksObject *object,
                                  const gchar *job_operation,
                                  uid_t job_started_by_uid,
                                  GCancellable *cancellable,
                                  uid_t run_as_uid,
                                  uid_t run_as_euid,
                                  const gchar *input_string,
                                  const gchar *command_line_format,
                                  ...);

Launches a new job for command_line_format .

The job is not started automatically! Use udisks_spawned_job_start() to start the job after “spawned-job-completed” or “completed” signals are connected (to get notified when the job is done). This is to prevent a race condition with the spawned process terminating before the signals are connected in which case the signal handlers are never triggered.

The returned object will be exported on the bus until the “completed” signal is emitted on the object. It is not valid to use the returned object after this signal fires.

udisks_daemon_launch_spawned_job_sync ()

gboolean
udisks_daemon_launch_spawned_job_sync (UDisksDaemon *daemon,
                                       UDisksObject *object,
                                       const gchar *job_operation,
                                       uid_t job_started_by_uid,
                                       GCancellable *cancellable,
                                       uid_t run_as_uid,
                                       uid_t run_as_euid,
                                       gint *out_status,
                                       gchar **out_message,
                                       const gchar *input_string,
                                       const gchar *command_line_format,
                                       ...);

Like udisks_daemon_launch_spawned_job() but blocks the calling thread until the job completes.

udisks_daemon_launch_spawned_job_gstring ()

UDisksBaseJob *
udisks_daemon_launch_spawned_job_gstring
                               (UDisksDaemon *daemon,
                                UDisksObject *object,
                                const gchar *job_operation,
                                uid_t job_started_by_uid,
                                GCancellable *cancellable,
                                uid_t run_as_uid,
                                uid_t run_as_euid,
                                GString *input_string,
                                const gchar *command_line_format,
                                ...);

Launches a new job for command_line_format .

The job is not started automatically! Use udisks_spawned_job_start() to start the job after “spawned-job-completed” or “completed” signals are connected (to get notified when the job is done). This is to prevent a race condition with the spawned process terminating before the signals are connected in which case the signal handlers are never triggered.

The returned object will be exported on the bus until the “completed” signal is emitted on the object. It is not valid to use the returned object after this signal fires.

This function is the same as udisks_daemon_launch_spawned_job, with the only difference that it takes a GString and is therefore able to handle binary inputs that contain '\0' bytes.

udisks_daemon_launch_spawned_job_gstring_sync ()

gboolean
udisks_daemon_launch_spawned_job_gstring_sync
                               (UDisksDaemon *daemon,
                                UDisksObject *object,
                                const gchar *job_operation,
                                uid_t job_started_by_uid,
                                GCancellable *cancellable,
                                uid_t run_as_uid,
                                uid_t run_as_euid,
                                gint *out_status,
                                gchar **out_message,
                                GString *input_string,
                                const gchar *command_line_format,
                                ...);

Like udisks_daemon_launch_spawned_job() but blocks the calling thread until the job completes.

This function is the same as udisks_daemon_launch_spawned_job_sync, with the only difference that it takes a GString and is therefore able to handle binary inputs that contain '\0' bytes.

udisks_daemon_launch_threaded_job ()

UDisksBaseJob *
udisks_daemon_launch_threaded_job (UDisksDaemon *daemon,
                                   UDisksObject *object,
                                   const gchar *job_operation,
                                   uid_t job_started_by_uid,
                                   UDisksThreadedJobFunc job_func,
                                   gpointer user_data,
                                   GDestroyNotify user_data_free_func,
                                   GCancellable *cancellable);

Launches a new job by running job_func in a new dedicated thread.

The job is not started automatically! Use udisks_threaded_job_start() to start the job after “threaded-job-completed” or “completed” signals are connected (to get notified when the job is done). This is to prevent a race condition with the job_func finishing before the signals are connected in which case the signal handlers are never triggered.

Long-running jobs should periodically check cancellable to see if they have been cancelled.

The returned object will be exported on the bus until the “completed” signal is emitted on the object. It is not valid to use the returned object after this signal fires.

udisks_daemon_launch_threaded_job_sync ()

gboolean
udisks_daemon_launch_threaded_job_sync
                               (UDisksDaemon *daemon,
                                UDisksObject *object,
                                const gchar *job_operation,
                                uid_t job_started_by_uid,
                                UDisksThreadedJobFunc job_func,
                                gpointer user_data,
                                GDestroyNotify user_data_free_func,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_daemon_launch_threaded_job() but blocks the calling thread until the job completes.

udisks_daemon_get_uuid ()

const gchar *
udisks_daemon_get_uuid (UDisksDaemon *daemon);

Gets the UUID string specific to this daemon instance.

UDisksDaemon

typedef struct _UDisksDaemon UDisksDaemon;

The UDisksDaemon structure contains only private data and should only be accessed using the provided API.

UDISKS_DEFAULT_WAIT_TIMEOUT

#define UDISKS_DEFAULT_WAIT_TIMEOUT 20  /* seconds */

Default timeout in seconds to wait for an object or uevent.

The “connection” property

  “connection”               GDBusConnection *

The GDBusConnection the daemon is for.

Owner: UDisksDaemon

Flags: Read / Write / Construct Only

The “disable-modules” property

  “disable-modules”          gboolean

Whether modules should be disabled

Owner: UDisksDaemon

Flags: Read / Write / Construct Only

Default value: FALSE

The “enable-tcrypt” property

  “enable-tcrypt”            gboolean

Whether devices should be tested for being TCRYPT encrypted.

Owner: UDisksDaemon

Flags: Read / Write / Construct Only

Default value: FALSE

The “force-load-modules” property

  “force-load-modules”       gboolean

Whether modules should be activated upon startup

Owner: UDisksDaemon

Flags: Read / Write / Construct Only

Default value: FALSE

The “mount-monitor” property

  “mount-monitor”            UDisksMountMonitor *

The UDisksMountMonitor used by the daemon

Owner: UDisksDaemon

Flags: Read

The “object-manager” property

  “object-manager”           GDBusObjectManagerServer *

The GDBusObjectManager used by the daemon

Owner: UDisksDaemon

Flags: Read

The “uninstalled” property

  “uninstalled”              gboolean

Loads modules from the build directory.

Owner: UDisksDaemon

Flags: Read / Write / Construct Only

Default value: FALSE

The “uuid” property

  “uuid”                     char *

The UUID specific for this daemon instance.

Owner: UDisksDaemon

Flags: Read / Write

Default value: NULL