udisks_block_interface_info ()

GDBusInterfaceInfo *
udisks_block_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.Block D-Bus interface.

udisks_block_override_properties ()

guint
udisks_block_override_properties (GObjectClass *klass,
                                  guint property_id_begin);

Overrides all GObject properties in the UDisksBlock interface for a concrete class. The properties are overridden in the order they are defined.

udisks_block_call_get_secret_configuration ()

void
udisks_block_call_get_secret_configuration
                               (UDisksBlock *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the GetSecretConfiguration() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_get_secret_configuration_finish() to get the result of the operation.

See udisks_block_call_get_secret_configuration_sync() for the synchronous, blocking version of this method.

udisks_block_call_get_secret_configuration_finish ()

gboolean
udisks_block_call_get_secret_configuration_finish
                               (UDisksBlock *proxy,
                                GVariant **out_configuration,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_get_secret_configuration().

udisks_block_call_get_secret_configuration_sync ()

gboolean
udisks_block_call_get_secret_configuration_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_options,
                                GVariant **out_configuration,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GetSecretConfiguration() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_get_secret_configuration() for the asynchronous version of this method.

udisks_block_complete_get_secret_configuration ()

void
udisks_block_complete_get_secret_configuration
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation,
                                GVariant *configuration);

Helper function used in service implementations to finish handling invocations of the GetSecretConfiguration() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_add_configuration_item ()

void
udisks_block_call_add_configuration_item
                               (UDisksBlock *proxy,
                                GVariant *arg_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the AddConfigurationItem() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_add_configuration_item_finish() to get the result of the operation.

See udisks_block_call_add_configuration_item_sync() for the synchronous, blocking version of this method.

udisks_block_call_add_configuration_item_finish ()

gboolean
udisks_block_call_add_configuration_item_finish
                               (UDisksBlock *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_add_configuration_item().

udisks_block_call_add_configuration_item_sync ()

gboolean
udisks_block_call_add_configuration_item_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the AddConfigurationItem() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_add_configuration_item() for the asynchronous version of this method.

udisks_block_complete_add_configuration_item ()

void
udisks_block_complete_add_configuration_item
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the AddConfigurationItem() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_remove_configuration_item ()

void
udisks_block_call_remove_configuration_item
                               (UDisksBlock *proxy,
                                GVariant *arg_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the RemoveConfigurationItem() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_remove_configuration_item_finish() to get the result of the operation.

See udisks_block_call_remove_configuration_item_sync() for the synchronous, blocking version of this method.

udisks_block_call_remove_configuration_item_finish ()

gboolean
udisks_block_call_remove_configuration_item_finish
                               (UDisksBlock *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_remove_configuration_item().

udisks_block_call_remove_configuration_item_sync ()

gboolean
udisks_block_call_remove_configuration_item_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the RemoveConfigurationItem() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_remove_configuration_item() for the asynchronous version of this method.

udisks_block_complete_remove_configuration_item ()

void
udisks_block_complete_remove_configuration_item
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the RemoveConfigurationItem() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_update_configuration_item ()

void
udisks_block_call_update_configuration_item
                               (UDisksBlock *proxy,
                                GVariant *arg_old_item,
                                GVariant *arg_new_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the UpdateConfigurationItem() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_update_configuration_item_finish() to get the result of the operation.

See udisks_block_call_update_configuration_item_sync() for the synchronous, blocking version of this method.

udisks_block_call_update_configuration_item_finish ()

gboolean
udisks_block_call_update_configuration_item_finish
                               (UDisksBlock *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_update_configuration_item().

udisks_block_call_update_configuration_item_sync ()

gboolean
udisks_block_call_update_configuration_item_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_old_item,
                                GVariant *arg_new_item,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the UpdateConfigurationItem() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_update_configuration_item() for the asynchronous version of this method.

udisks_block_complete_update_configuration_item ()

void
udisks_block_complete_update_configuration_item
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the UpdateConfigurationItem() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_format ()

void
udisks_block_call_format (UDisksBlock *proxy,
                          const gchar *arg_type,
                          GVariant *arg_options,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously invokes the Format() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_format_finish() to get the result of the operation.

See udisks_block_call_format_sync() for the synchronous, blocking version of this method.

udisks_block_call_format_finish ()

gboolean
udisks_block_call_format_finish (UDisksBlock *proxy,
                                 GAsyncResult *res,
                                 GError **error);

Finishes an operation started with udisks_block_call_format().

udisks_block_call_format_sync ()

gboolean
udisks_block_call_format_sync (UDisksBlock *proxy,
                               const gchar *arg_type,
                               GVariant *arg_options,
                               GCancellable *cancellable,
                               GError **error);

Synchronously invokes the Format() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_format() for the asynchronous version of this method.

udisks_block_complete_format ()

void
udisks_block_complete_format (UDisksBlock *object,
                              GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Format() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_open_for_backup ()

void
udisks_block_call_open_for_backup (UDisksBlock *proxy,
                                   GVariant *arg_options,
                                   GUnixFDList *fd_list,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the OpenForBackup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_open_for_backup_finish() to get the result of the operation.

See udisks_block_call_open_for_backup_sync() for the synchronous, blocking version of this method.

udisks_block_call_open_for_backup_finish ()

gboolean
udisks_block_call_open_for_backup_finish
                               (UDisksBlock *proxy,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_open_for_backup().

udisks_block_call_open_for_backup_sync ()

gboolean
udisks_block_call_open_for_backup_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_options,
                                GUnixFDList *fd_list,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the OpenForBackup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_open_for_backup() for the asynchronous version of this method.

udisks_block_complete_open_for_backup ()

void
udisks_block_complete_open_for_backup (UDisksBlock *object,
                                       GDBusMethodInvocation *invocation,
                                       GUnixFDList *fd_list,
                                       GVariant *fd);

Helper function used in service implementations to finish handling invocations of the OpenForBackup() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_open_for_restore ()

void
udisks_block_call_open_for_restore (UDisksBlock *proxy,
                                    GVariant *arg_options,
                                    GUnixFDList *fd_list,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the OpenForRestore() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_open_for_restore_finish() to get the result of the operation.

See udisks_block_call_open_for_restore_sync() for the synchronous, blocking version of this method.

udisks_block_call_open_for_restore_finish ()

gboolean
udisks_block_call_open_for_restore_finish
                               (UDisksBlock *proxy,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_open_for_restore().

udisks_block_call_open_for_restore_sync ()

gboolean
udisks_block_call_open_for_restore_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_options,
                                GUnixFDList *fd_list,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the OpenForRestore() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_open_for_restore() for the asynchronous version of this method.

udisks_block_complete_open_for_restore ()

void
udisks_block_complete_open_for_restore
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation,
                                GUnixFDList *fd_list,
                                GVariant *fd);

Helper function used in service implementations to finish handling invocations of the OpenForRestore() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_open_for_benchmark ()

void
udisks_block_call_open_for_benchmark (UDisksBlock *proxy,
                                      GVariant *arg_options,
                                      GUnixFDList *fd_list,
                                      GCancellable *cancellable,
                                      GAsyncReadyCallback callback,
                                      gpointer user_data);

Asynchronously invokes the OpenForBenchmark() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_open_for_benchmark_finish() to get the result of the operation.

See udisks_block_call_open_for_benchmark_sync() for the synchronous, blocking version of this method.

udisks_block_call_open_for_benchmark_finish ()

gboolean
udisks_block_call_open_for_benchmark_finish
                               (UDisksBlock *proxy,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_call_open_for_benchmark().

udisks_block_call_open_for_benchmark_sync ()

gboolean
udisks_block_call_open_for_benchmark_sync
                               (UDisksBlock *proxy,
                                GVariant *arg_options,
                                GUnixFDList *fd_list,
                                GVariant **out_fd,
                                GUnixFDList **out_fd_list,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the OpenForBenchmark() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_open_for_benchmark() for the asynchronous version of this method.

udisks_block_complete_open_for_benchmark ()

void
udisks_block_complete_open_for_benchmark
                               (UDisksBlock *object,
                                GDBusMethodInvocation *invocation,
                                GUnixFDList *fd_list,
                                GVariant *fd);

Helper function used in service implementations to finish handling invocations of the OpenForBenchmark() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_call_open_device ()

void
udisks_block_call_open_device (UDisksBlock *proxy,
                               const gchar *arg_mode,
                               GVariant *arg_options,
                               GUnixFDList *fd_list,
                               GCancellable *cancellable,
                               GAsyncReadyCallback callback,
                               gpointer user_data);

Asynchronously invokes the OpenDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_open_device_finish() to get the result of the operation.

See udisks_block_call_open_device_sync() for the synchronous, blocking version of this method.

Since: 2.7.3

udisks_block_call_open_device_finish ()

gboolean
udisks_block_call_open_device_finish (UDisksBlock *proxy,
                                      GVariant **out_fd,
                                      GUnixFDList **out_fd_list,
                                      GAsyncResult *res,
                                      GError **error);

Finishes an operation started with udisks_block_call_open_device().

Since: 2.7.3

udisks_block_call_open_device_sync ()

gboolean
udisks_block_call_open_device_sync (UDisksBlock *proxy,
                                    const gchar *arg_mode,
                                    GVariant *arg_options,
                                    GUnixFDList *fd_list,
                                    GVariant **out_fd,
                                    GUnixFDList **out_fd_list,
                                    GCancellable *cancellable,
                                    GError **error);

Synchronously invokes the OpenDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_open_device() for the asynchronous version of this method.

Since: 2.7.3

udisks_block_complete_open_device ()

void
udisks_block_complete_open_device (UDisksBlock *object,
                                   GDBusMethodInvocation *invocation,
                                   GUnixFDList *fd_list,
                                   GVariant *fd);

Helper function used in service implementations to finish handling invocations of the OpenDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.7.3

udisks_block_call_rescan ()

void
udisks_block_call_rescan (UDisksBlock *proxy,
                          GVariant *arg_options,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously invokes the Rescan() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_call_rescan_finish() to get the result of the operation.

See udisks_block_call_rescan_sync() for the synchronous, blocking version of this method.

udisks_block_call_rescan_finish ()

gboolean
udisks_block_call_rescan_finish (UDisksBlock *proxy,
                                 GAsyncResult *res,
                                 GError **error);

Finishes an operation started with udisks_block_call_rescan().

udisks_block_call_rescan_sync ()

gboolean
udisks_block_call_rescan_sync (UDisksBlock *proxy,
                               GVariant *arg_options,
                               GCancellable *cancellable,
                               GError **error);

Synchronously invokes the Rescan() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_call_rescan() for the asynchronous version of this method.

udisks_block_complete_rescan ()

void
udisks_block_complete_rescan (UDisksBlock *object,
                              GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Rescan() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_block_get_configuration ()

GVariant *
udisks_block_get_configuration (UDisksBlock *object);

Gets the value of the "Configuration" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_configuration() if on another thread.

[skip]

udisks_block_get_crypto_backing_device ()

const gchar *
udisks_block_get_crypto_backing_device
                               (UDisksBlock *object);

Gets the value of the "CryptoBackingDevice" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_crypto_backing_device() if on another thread.

[skip]

udisks_block_get_device ()

const gchar *
udisks_block_get_device (UDisksBlock *object);

Gets the value of the "Device" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_device() if on another thread.

[skip]

udisks_block_get_drive ()

const gchar *
udisks_block_get_drive (UDisksBlock *object);

Gets the value of the "Drive" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_drive() if on another thread.

[skip]

udisks_block_get_id_label ()

const gchar *
udisks_block_get_id_label (UDisksBlock *object);

Gets the value of the "IdLabel" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id_label() if on another thread.

[skip]

udisks_block_get_id_type ()

const gchar *
udisks_block_get_id_type (UDisksBlock *object);

Gets the value of the "IdType" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id_type() if on another thread.

[skip]

udisks_block_get_id_usage ()

const gchar *
udisks_block_get_id_usage (UDisksBlock *object);

Gets the value of the "IdUsage" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id_usage() if on another thread.

[skip]

udisks_block_get_id_uuid ()

const gchar *
udisks_block_get_id_uuid (UDisksBlock *object);

Gets the value of the "IdUUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id_uuid() if on another thread.

[skip]

udisks_block_get_id_version ()

const gchar *
udisks_block_get_id_version (UDisksBlock *object);

Gets the value of the "IdVersion" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id_version() if on another thread.

[skip]

udisks_block_get_device_number ()

guint64
udisks_block_get_device_number (UDisksBlock *object);

Gets the value of the "DeviceNumber" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_preferred_device ()

const gchar *
udisks_block_get_preferred_device (UDisksBlock *object);

Gets the value of the "PreferredDevice" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_preferred_device() if on another thread.

[skip]

udisks_block_get_id ()

const gchar *
udisks_block_get_id (UDisksBlock *object);

Gets the value of the "Id" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_id() if on another thread.

[skip]

Since: 2.0.0

udisks_block_get_size ()

guint64
udisks_block_get_size (UDisksBlock *object);

Gets the value of the "Size" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_read_only ()

gboolean
udisks_block_get_read_only (UDisksBlock *object);

Gets the value of the "ReadOnly" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_symlinks ()

const gchar *const *
udisks_block_get_symlinks (UDisksBlock *object);

Gets the value of the "Symlinks" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_symlinks() if on another thread.

[skip]

udisks_block_get_hint_partitionable ()

gboolean
udisks_block_get_hint_partitionable (UDisksBlock *object);

Gets the value of the "HintPartitionable" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_hint_system ()

gboolean
udisks_block_get_hint_system (UDisksBlock *object);

Gets the value of the "HintSystem" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_hint_ignore ()

gboolean
udisks_block_get_hint_ignore (UDisksBlock *object);

Gets the value of the "HintIgnore" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_hint_auto ()

gboolean
udisks_block_get_hint_auto (UDisksBlock *object);

Gets the value of the "HintAuto" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_get_hint_name ()

const gchar *
udisks_block_get_hint_name (UDisksBlock *object);

Gets the value of the "HintName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_hint_name() if on another thread.

[skip]

udisks_block_get_hint_icon_name ()

const gchar *
udisks_block_get_hint_icon_name (UDisksBlock *object);

Gets the value of the "HintIconName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_hint_icon_name() if on another thread.

[skip]

udisks_block_get_hint_symbolic_icon_name ()

const gchar *
udisks_block_get_hint_symbolic_icon_name
                               (UDisksBlock *object);

Gets the value of the "HintSymbolicIconName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_hint_symbolic_icon_name() if on another thread.

[skip]

Since: 2.0.0

udisks_block_get_mdraid ()

const gchar *
udisks_block_get_mdraid (UDisksBlock *object);

Gets the value of the "MDRaid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_mdraid() if on another thread.

[skip]

Since: 2.0.0

udisks_block_get_mdraid_member ()

const gchar *
udisks_block_get_mdraid_member (UDisksBlock *object);

Gets the value of the "MDRaidMember" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_block_dup_mdraid_member() if on another thread.

[skip]

Since: 2.0.0

udisks_block_dup_configuration ()

GVariant *
udisks_block_dup_configuration (UDisksBlock *object);

Gets a copy of the "Configuration" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_crypto_backing_device ()

gchar *
udisks_block_dup_crypto_backing_device
                               (UDisksBlock *object);

Gets a copy of the "CryptoBackingDevice" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_device ()

gchar *
udisks_block_dup_device (UDisksBlock *object);

Gets a copy of the "Device" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_drive ()

gchar *
udisks_block_dup_drive (UDisksBlock *object);

Gets a copy of the "Drive" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id_label ()

gchar *
udisks_block_dup_id_label (UDisksBlock *object);

Gets a copy of the "IdLabel" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id_type ()

gchar *
udisks_block_dup_id_type (UDisksBlock *object);

Gets a copy of the "IdType" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id_usage ()

gchar *
udisks_block_dup_id_usage (UDisksBlock *object);

Gets a copy of the "IdUsage" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id_uuid ()

gchar *
udisks_block_dup_id_uuid (UDisksBlock *object);

Gets a copy of the "IdUUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id_version ()

gchar *
udisks_block_dup_id_version (UDisksBlock *object);

Gets a copy of the "IdVersion" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_preferred_device ()

gchar *
udisks_block_dup_preferred_device (UDisksBlock *object);

Gets a copy of the "PreferredDevice" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_id ()

gchar *
udisks_block_dup_id (UDisksBlock *object);

Gets a copy of the "Id" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_block_dup_symlinks ()

gchar **
udisks_block_dup_symlinks (UDisksBlock *object);

Gets a copy of the "Symlinks" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_hint_name ()

gchar *
udisks_block_dup_hint_name (UDisksBlock *object);

Gets a copy of the "HintName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_hint_icon_name ()

gchar *
udisks_block_dup_hint_icon_name (UDisksBlock *object);

Gets a copy of the "HintIconName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_block_dup_hint_symbolic_icon_name ()

gchar *
udisks_block_dup_hint_symbolic_icon_name
                               (UDisksBlock *object);

Gets a copy of the "HintSymbolicIconName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_block_dup_mdraid ()

gchar *
udisks_block_dup_mdraid (UDisksBlock *object);

Gets a copy of the "MDRaid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_block_dup_mdraid_member ()

gchar *
udisks_block_dup_mdraid_member (UDisksBlock *object);

Gets a copy of the "MDRaidMember" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_block_set_configuration ()

void
udisks_block_set_configuration (UDisksBlock *object,
                                GVariant *value);

Sets the "Configuration" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_crypto_backing_device ()

void
udisks_block_set_crypto_backing_device
                               (UDisksBlock *object,
                                const gchar *value);

Sets the "CryptoBackingDevice" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_device ()

void
udisks_block_set_device (UDisksBlock *object,
                         const gchar *value);

Sets the "Device" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_drive ()

void
udisks_block_set_drive (UDisksBlock *object,
                        const gchar *value);

Sets the "Drive" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id_label ()

void
udisks_block_set_id_label (UDisksBlock *object,
                           const gchar *value);

Sets the "IdLabel" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id_type ()

void
udisks_block_set_id_type (UDisksBlock *object,
                          const gchar *value);

Sets the "IdType" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id_usage ()

void
udisks_block_set_id_usage (UDisksBlock *object,
                           const gchar *value);

Sets the "IdUsage" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id_uuid ()

void
udisks_block_set_id_uuid (UDisksBlock *object,
                          const gchar *value);

Sets the "IdUUID" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id_version ()

void
udisks_block_set_id_version (UDisksBlock *object,
                             const gchar *value);

Sets the "IdVersion" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_device_number ()

void
udisks_block_set_device_number (UDisksBlock *object,
                                guint64 value);

Sets the "DeviceNumber" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_preferred_device ()

void
udisks_block_set_preferred_device (UDisksBlock *object,
                                   const gchar *value);

Sets the "PreferredDevice" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_id ()

void
udisks_block_set_id (UDisksBlock *object,
                     const gchar *value);

Sets the "Id" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_block_set_size ()

void
udisks_block_set_size (UDisksBlock *object,
                       guint64 value);

Sets the "Size" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_read_only ()

void
udisks_block_set_read_only (UDisksBlock *object,
                            gboolean value);

Sets the "ReadOnly" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_symlinks ()

void
udisks_block_set_symlinks (UDisksBlock *object,
                           const gchar *const *value);

Sets the "Symlinks" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_partitionable ()

void
udisks_block_set_hint_partitionable (UDisksBlock *object,
                                     gboolean value);

Sets the "HintPartitionable" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_system ()

void
udisks_block_set_hint_system (UDisksBlock *object,
                              gboolean value);

Sets the "HintSystem" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_ignore ()

void
udisks_block_set_hint_ignore (UDisksBlock *object,
                              gboolean value);

Sets the "HintIgnore" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_auto ()

void
udisks_block_set_hint_auto (UDisksBlock *object,
                            gboolean value);

Sets the "HintAuto" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_name ()

void
udisks_block_set_hint_name (UDisksBlock *object,
                            const gchar *value);

Sets the "HintName" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_icon_name ()

void
udisks_block_set_hint_icon_name (UDisksBlock *object,
                                 const gchar *value);

Sets the "HintIconName" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_block_set_hint_symbolic_icon_name ()

void
udisks_block_set_hint_symbolic_icon_name
                               (UDisksBlock *object,
                                const gchar *value);

Sets the "HintSymbolicIconName" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_block_set_mdraid ()

void
udisks_block_set_mdraid (UDisksBlock *object,
                         const gchar *value);

Sets the "MDRaid" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_block_set_mdraid_member ()

void
udisks_block_set_mdraid_member (UDisksBlock *object,
                                const gchar *value);

Sets the "MDRaidMember" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_block_proxy_new ()

void
udisks_block_proxy_new (GDBusConnection *connection,
                        GDBusProxyFlags flags,
                        const gchar *name,
                        const gchar *object_path,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Block. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_proxy_new_finish() to get the result of the operation.

See udisks_block_proxy_new_sync() for the synchronous, blocking version of this constructor.

udisks_block_proxy_new_finish ()

UDisksBlock *
udisks_block_proxy_new_finish (GAsyncResult *res,
                               GError **error);

Finishes an operation started with udisks_block_proxy_new().

udisks_block_proxy_new_sync ()

UDisksBlock *
udisks_block_proxy_new_sync (GDBusConnection *connection,
                             GDBusProxyFlags flags,
                             const gchar *name,
                             const gchar *object_path,
                             GCancellable *cancellable,
                             GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Block. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_block_proxy_new() for the asynchronous version of this constructor.

udisks_block_proxy_new_for_bus ()

void
udisks_block_proxy_new_for_bus (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Like udisks_block_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_block_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_block_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

udisks_block_proxy_new_for_bus_finish ()

UDisksBlock *
udisks_block_proxy_new_for_bus_finish (GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_block_proxy_new_for_bus().