udisks_drive_ata_interface_info ()

GDBusInterfaceInfo *
udisks_drive_ata_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.Drive.Ata D-Bus interface.

udisks_drive_ata_override_properties ()

guint
udisks_drive_ata_override_properties (GObjectClass *klass,
                                      guint property_id_begin);

Overrides all GObject properties in the UDisksDriveAta interface for a concrete class. The properties are overridden in the order they are defined.

udisks_drive_ata_call_smart_update ()

void
udisks_drive_ata_call_smart_update (UDisksDriveAta *proxy,
                                    GVariant *arg_options,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the SmartUpdate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_smart_update_finish() to get the result of the operation.

See udisks_drive_ata_call_smart_update_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_smart_update_finish ()

gboolean
udisks_drive_ata_call_smart_update_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_smart_update().

udisks_drive_ata_call_smart_update_sync ()

gboolean
udisks_drive_ata_call_smart_update_sync
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartUpdate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_smart_update() for the asynchronous version of this method.

udisks_drive_ata_complete_smart_update ()

void
udisks_drive_ata_complete_smart_update
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartUpdate() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_smart_get_attributes ()

void
udisks_drive_ata_call_smart_get_attributes
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartGetAttributes() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_smart_get_attributes_finish() to get the result of the operation.

See udisks_drive_ata_call_smart_get_attributes_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_smart_get_attributes_finish ()

gboolean
udisks_drive_ata_call_smart_get_attributes_finish
                               (UDisksDriveAta *proxy,
                                GVariant **out_attributes,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_smart_get_attributes().

udisks_drive_ata_call_smart_get_attributes_sync ()

gboolean
udisks_drive_ata_call_smart_get_attributes_sync
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GVariant **out_attributes,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartGetAttributes() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_smart_get_attributes() for the asynchronous version of this method.

udisks_drive_ata_complete_smart_get_attributes ()

void
udisks_drive_ata_complete_smart_get_attributes
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation,
                                GVariant *attributes);

Helper function used in service implementations to finish handling invocations of the SmartGetAttributes() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_smart_selftest_abort ()

void
udisks_drive_ata_call_smart_selftest_abort
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartSelftestAbort() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_smart_selftest_abort_finish() to get the result of the operation.

See udisks_drive_ata_call_smart_selftest_abort_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_smart_selftest_abort_finish ()

gboolean
udisks_drive_ata_call_smart_selftest_abort_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_smart_selftest_abort().

udisks_drive_ata_call_smart_selftest_abort_sync ()

gboolean
udisks_drive_ata_call_smart_selftest_abort_sync
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartSelftestAbort() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_smart_selftest_abort() for the asynchronous version of this method.

udisks_drive_ata_complete_smart_selftest_abort ()

void
udisks_drive_ata_complete_smart_selftest_abort
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartSelftestAbort() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_smart_selftest_start ()

void
udisks_drive_ata_call_smart_selftest_start
                               (UDisksDriveAta *proxy,
                                const gchar *arg_type,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartSelftestStart() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_smart_selftest_start_finish() to get the result of the operation.

See udisks_drive_ata_call_smart_selftest_start_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_smart_selftest_start_finish ()

gboolean
udisks_drive_ata_call_smart_selftest_start_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_smart_selftest_start().

udisks_drive_ata_call_smart_selftest_start_sync ()

gboolean
udisks_drive_ata_call_smart_selftest_start_sync
                               (UDisksDriveAta *proxy,
                                const gchar *arg_type,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartSelftestStart() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_smart_selftest_start() for the asynchronous version of this method.

udisks_drive_ata_complete_smart_selftest_start ()

void
udisks_drive_ata_complete_smart_selftest_start
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartSelftestStart() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_smart_set_enabled ()

void
udisks_drive_ata_call_smart_set_enabled
                               (UDisksDriveAta *proxy,
                                gboolean arg_value,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SmartSetEnabled() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_smart_set_enabled_finish() to get the result of the operation.

See udisks_drive_ata_call_smart_set_enabled_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_drive_ata_call_smart_set_enabled_finish ()

gboolean
udisks_drive_ata_call_smart_set_enabled_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_smart_set_enabled().

Since: 2.0.0

udisks_drive_ata_call_smart_set_enabled_sync ()

gboolean
udisks_drive_ata_call_smart_set_enabled_sync
                               (UDisksDriveAta *proxy,
                                gboolean arg_value,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SmartSetEnabled() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_smart_set_enabled() for the asynchronous version of this method.

Since: 2.0.0

udisks_drive_ata_complete_smart_set_enabled ()

void
udisks_drive_ata_complete_smart_set_enabled
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SmartSetEnabled() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_drive_ata_call_pm_get_state ()

void
udisks_drive_ata_call_pm_get_state (UDisksDriveAta *proxy,
                                    GVariant *arg_options,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the PmGetState() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_pm_get_state_finish() to get the result of the operation.

See udisks_drive_ata_call_pm_get_state_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_pm_get_state_finish ()

gboolean
udisks_drive_ata_call_pm_get_state_finish
                               (UDisksDriveAta *proxy,
                                guchar *out_state,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_pm_get_state().

udisks_drive_ata_call_pm_get_state_sync ()

gboolean
udisks_drive_ata_call_pm_get_state_sync
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                guchar *out_state,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the PmGetState() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_pm_get_state() for the asynchronous version of this method.

udisks_drive_ata_complete_pm_get_state ()

void
udisks_drive_ata_complete_pm_get_state
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation,
                                guchar state);

Helper function used in service implementations to finish handling invocations of the PmGetState() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_pm_standby ()

void
udisks_drive_ata_call_pm_standby (UDisksDriveAta *proxy,
                                  GVariant *arg_options,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the PmStandby() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_pm_standby_finish() to get the result of the operation.

See udisks_drive_ata_call_pm_standby_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_pm_standby_finish ()

gboolean
udisks_drive_ata_call_pm_standby_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_pm_standby().

udisks_drive_ata_call_pm_standby_sync ()

gboolean
udisks_drive_ata_call_pm_standby_sync (UDisksDriveAta *proxy,
                                       GVariant *arg_options,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the PmStandby() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_pm_standby() for the asynchronous version of this method.

udisks_drive_ata_complete_pm_standby ()

void
udisks_drive_ata_complete_pm_standby (UDisksDriveAta *object,
                                      GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the PmStandby() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_pm_wakeup ()

void
udisks_drive_ata_call_pm_wakeup (UDisksDriveAta *proxy,
                                 GVariant *arg_options,
                                 GCancellable *cancellable,
                                 GAsyncReadyCallback callback,
                                 gpointer user_data);

Asynchronously invokes the PmWakeup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_pm_wakeup_finish() to get the result of the operation.

See udisks_drive_ata_call_pm_wakeup_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_pm_wakeup_finish ()

gboolean
udisks_drive_ata_call_pm_wakeup_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_pm_wakeup().

udisks_drive_ata_call_pm_wakeup_sync ()

gboolean
udisks_drive_ata_call_pm_wakeup_sync (UDisksDriveAta *proxy,
                                      GVariant *arg_options,
                                      GCancellable *cancellable,
                                      GError **error);

Synchronously invokes the PmWakeup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_pm_wakeup() for the asynchronous version of this method.

udisks_drive_ata_complete_pm_wakeup ()

void
udisks_drive_ata_complete_pm_wakeup (UDisksDriveAta *object,
                                     GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the PmWakeup() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_call_security_erase_unit ()

void
udisks_drive_ata_call_security_erase_unit
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SecurityEraseUnit() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_call_security_erase_unit_finish() to get the result of the operation.

See udisks_drive_ata_call_security_erase_unit_sync() for the synchronous, blocking version of this method.

udisks_drive_ata_call_security_erase_unit_finish ()

gboolean
udisks_drive_ata_call_security_erase_unit_finish
                               (UDisksDriveAta *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_call_security_erase_unit().

udisks_drive_ata_call_security_erase_unit_sync ()

gboolean
udisks_drive_ata_call_security_erase_unit_sync
                               (UDisksDriveAta *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SecurityEraseUnit() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_drive_ata_call_security_erase_unit() for the asynchronous version of this method.

udisks_drive_ata_complete_security_erase_unit ()

void
udisks_drive_ata_complete_security_erase_unit
                               (UDisksDriveAta *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SecurityEraseUnit() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

udisks_drive_ata_get_smart_supported ()

gboolean
udisks_drive_ata_get_smart_supported (UDisksDriveAta *object);

Gets the value of the "SmartSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_enabled ()

gboolean
udisks_drive_ata_get_smart_enabled (UDisksDriveAta *object);

Gets the value of the "SmartEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_updated ()

guint64
udisks_drive_ata_get_smart_updated (UDisksDriveAta *object);

Gets the value of the "SmartUpdated" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_failing ()

gboolean
udisks_drive_ata_get_smart_failing (UDisksDriveAta *object);

Gets the value of the "SmartFailing" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_temperature ()

gdouble
udisks_drive_ata_get_smart_temperature
                               (UDisksDriveAta *object);

Gets the value of the "SmartTemperature" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_power_on_seconds ()

guint64
udisks_drive_ata_get_smart_power_on_seconds
                               (UDisksDriveAta *object);

Gets the value of the "SmartPowerOnSeconds" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_num_attributes_failed_in_the_past ()

gint
udisks_drive_ata_get_smart_num_attributes_failed_in_the_past
                               (UDisksDriveAta *object);

Gets the value of the "SmartNumAttributesFailedInThePast" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_num_attributes_failing ()

gint
udisks_drive_ata_get_smart_num_attributes_failing
                               (UDisksDriveAta *object);

Gets the value of the "SmartNumAttributesFailing" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_num_bad_sectors ()

gint64
udisks_drive_ata_get_smart_num_bad_sectors
                               (UDisksDriveAta *object);

Gets the value of the "SmartNumBadSectors" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_selftest_percent_remaining ()

gint
udisks_drive_ata_get_smart_selftest_percent_remaining
                               (UDisksDriveAta *object);

Gets the value of the "SmartSelftestPercentRemaining" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_smart_selftest_status ()

const gchar *
udisks_drive_ata_get_smart_selftest_status
                               (UDisksDriveAta *object);

Gets the value of the "SmartSelftestStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_drive_ata_dup_smart_selftest_status() if on another thread.

[skip]

udisks_drive_ata_dup_smart_selftest_status ()

gchar *
udisks_drive_ata_dup_smart_selftest_status
                               (UDisksDriveAta *object);

Gets a copy of the "SmartSelftestStatus" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_aam_enabled ()

gboolean
udisks_drive_ata_get_aam_enabled (UDisksDriveAta *object);

Gets the value of the "AamEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_aam_supported ()

gboolean
udisks_drive_ata_get_aam_supported (UDisksDriveAta *object);

Gets the value of the "AamSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_aam_vendor_recommended_value ()

gint
udisks_drive_ata_get_aam_vendor_recommended_value
                               (UDisksDriveAta *object);

Gets the value of the "AamVendorRecommendedValue" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_apm_enabled ()

gboolean
udisks_drive_ata_get_apm_enabled (UDisksDriveAta *object);

Gets the value of the "ApmEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_apm_supported ()

gboolean
udisks_drive_ata_get_apm_supported (UDisksDriveAta *object);

Gets the value of the "ApmSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_pm_enabled ()

gboolean
udisks_drive_ata_get_pm_enabled (UDisksDriveAta *object);

Gets the value of the "PmEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_pm_supported ()

gboolean
udisks_drive_ata_get_pm_supported (UDisksDriveAta *object);

Gets the value of the "PmSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_write_cache_enabled ()

gboolean
udisks_drive_ata_get_write_cache_enabled
                               (UDisksDriveAta *object);

Gets the value of the "WriteCacheEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_drive_ata_get_write_cache_supported ()

gboolean
udisks_drive_ata_get_write_cache_supported
                               (UDisksDriveAta *object);

Gets the value of the "WriteCacheSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_drive_ata_get_read_lookahead_enabled ()

gboolean
udisks_drive_ata_get_read_lookahead_enabled
                               (UDisksDriveAta *object);

Gets the value of the "ReadLookaheadEnabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.7

udisks_drive_ata_get_read_lookahead_supported ()

gboolean
udisks_drive_ata_get_read_lookahead_supported
                               (UDisksDriveAta *object);

Gets the value of the "ReadLookaheadSupported" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.7

udisks_drive_ata_get_security_enhanced_erase_unit_minutes ()

gint
udisks_drive_ata_get_security_enhanced_erase_unit_minutes
                               (UDisksDriveAta *object);

Gets the value of the "SecurityEnhancedEraseUnitMinutes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_security_erase_unit_minutes ()

gint
udisks_drive_ata_get_security_erase_unit_minutes
                               (UDisksDriveAta *object);

Gets the value of the "SecurityEraseUnitMinutes" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_get_security_frozen ()

gboolean
udisks_drive_ata_get_security_frozen (UDisksDriveAta *object);

Gets the value of the "SecurityFrozen" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

udisks_drive_ata_set_smart_supported ()

void
udisks_drive_ata_set_smart_supported (UDisksDriveAta *object,
                                      gboolean value);

Sets the "SmartSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_enabled ()

void
udisks_drive_ata_set_smart_enabled (UDisksDriveAta *object,
                                    gboolean value);

Sets the "SmartEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_updated ()

void
udisks_drive_ata_set_smart_updated (UDisksDriveAta *object,
                                    guint64 value);

Sets the "SmartUpdated" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_failing ()

void
udisks_drive_ata_set_smart_failing (UDisksDriveAta *object,
                                    gboolean value);

Sets the "SmartFailing" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_temperature ()

void
udisks_drive_ata_set_smart_temperature
                               (UDisksDriveAta *object,
                                gdouble value);

Sets the "SmartTemperature" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_power_on_seconds ()

void
udisks_drive_ata_set_smart_power_on_seconds
                               (UDisksDriveAta *object,
                                guint64 value);

Sets the "SmartPowerOnSeconds" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_num_attributes_failed_in_the_past ()

void
udisks_drive_ata_set_smart_num_attributes_failed_in_the_past
                               (UDisksDriveAta *object,
                                gint value);

Sets the "SmartNumAttributesFailedInThePast" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_num_attributes_failing ()

void
udisks_drive_ata_set_smart_num_attributes_failing
                               (UDisksDriveAta *object,
                                gint value);

Sets the "SmartNumAttributesFailing" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_num_bad_sectors ()

void
udisks_drive_ata_set_smart_num_bad_sectors
                               (UDisksDriveAta *object,
                                gint64 value);

Sets the "SmartNumBadSectors" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_selftest_percent_remaining ()

void
udisks_drive_ata_set_smart_selftest_percent_remaining
                               (UDisksDriveAta *object,
                                gint value);

Sets the "SmartSelftestPercentRemaining" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_smart_selftest_status ()

void
udisks_drive_ata_set_smart_selftest_status
                               (UDisksDriveAta *object,
                                const gchar *value);

Sets the "SmartSelftestStatus" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_aam_enabled ()

void
udisks_drive_ata_set_aam_enabled (UDisksDriveAta *object,
                                  gboolean value);

Sets the "AamEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_aam_supported ()

void
udisks_drive_ata_set_aam_supported (UDisksDriveAta *object,
                                    gboolean value);

Sets the "AamSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_aam_vendor_recommended_value ()

void
udisks_drive_ata_set_aam_vendor_recommended_value
                               (UDisksDriveAta *object,
                                gint value);

Sets the "AamVendorRecommendedValue" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_apm_enabled ()

void
udisks_drive_ata_set_apm_enabled (UDisksDriveAta *object,
                                  gboolean value);

Sets the "ApmEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_apm_supported ()

void
udisks_drive_ata_set_apm_supported (UDisksDriveAta *object,
                                    gboolean value);

Sets the "ApmSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_pm_enabled ()

void
udisks_drive_ata_set_pm_enabled (UDisksDriveAta *object,
                                 gboolean value);

Sets the "PmEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_pm_supported ()

void
udisks_drive_ata_set_pm_supported (UDisksDriveAta *object,
                                   gboolean value);

Sets the "PmSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_write_cache_enabled ()

void
udisks_drive_ata_set_write_cache_enabled
                               (UDisksDriveAta *object,
                                gboolean value);

Sets the "WriteCacheEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_drive_ata_set_write_cache_supported ()

void
udisks_drive_ata_set_write_cache_supported
                               (UDisksDriveAta *object,
                                gboolean value);

Sets the "WriteCacheSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_drive_ata_set_read_lookahead_enabled ()

void
udisks_drive_ata_set_read_lookahead_enabled
                               (UDisksDriveAta *object,
                                gboolean value);

Sets the "ReadLookaheadEnabled" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.7

udisks_drive_ata_set_read_lookahead_supported ()

void
udisks_drive_ata_set_read_lookahead_supported
                               (UDisksDriveAta *object,
                                gboolean value);

Sets the "ReadLookaheadSupported" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.7

udisks_drive_ata_set_security_enhanced_erase_unit_minutes ()

void
udisks_drive_ata_set_security_enhanced_erase_unit_minutes
                               (UDisksDriveAta *object,
                                gint value);

Sets the "SecurityEnhancedEraseUnitMinutes" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_security_erase_unit_minutes ()

void
udisks_drive_ata_set_security_erase_unit_minutes
                               (UDisksDriveAta *object,
                                gint value);

Sets the "SecurityEraseUnitMinutes" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_set_security_frozen ()

void
udisks_drive_ata_set_security_frozen (UDisksDriveAta *object,
                                      gboolean value);

Sets the "SecurityFrozen" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

udisks_drive_ata_proxy_new ()

void
udisks_drive_ata_proxy_new (GDBusConnection *connection,
                            GDBusProxyFlags flags,
                            const gchar *name,
                            const gchar *object_path,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_proxy_new_finish() to get the result of the operation.

See udisks_drive_ata_proxy_new_sync() for the synchronous, blocking version of this constructor.

udisks_drive_ata_proxy_new_finish ()

UDisksDriveAta *
udisks_drive_ata_proxy_new_finish (GAsyncResult *res,
                                   GError **error);

Finishes an operation started with udisks_drive_ata_proxy_new().

udisks_drive_ata_proxy_new_sync ()

UDisksDriveAta *
udisks_drive_ata_proxy_new_sync (GDBusConnection *connection,
                                 GDBusProxyFlags flags,
                                 const gchar *name,
                                 const gchar *object_path,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_drive_ata_proxy_new() for the asynchronous version of this constructor.

udisks_drive_ata_proxy_new_for_bus ()

void
udisks_drive_ata_proxy_new_for_bus (GBusType bus_type,
                                    GDBusProxyFlags flags,
                                    const gchar *name,
                                    const gchar *object_path,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Like udisks_drive_ata_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_drive_ata_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_drive_ata_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

udisks_drive_ata_proxy_new_for_bus_finish ()

UDisksDriveAta *
udisks_drive_ata_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_drive_ata_proxy_new_for_bus().

udisks_drive_ata_proxy_new_for_bus_sync ()

UDisksDriveAta *
udisks_drive_ata_proxy_new_for_bus_sync
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_drive_ata_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_drive_ata_proxy_new_for_bus() for the asynchronous version of this constructor.

udisks_drive_ata_skeleton_new ()

UDisksDriveAta *
udisks_drive_ata_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata.

UDisksDriveAta

typedef struct _UDisksDriveAta UDisksDriveAta;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata.

struct UDisksDriveAtaIface

struct UDisksDriveAtaIface {
  GTypeInterface parent_iface;

  gboolean (*handle_pm_get_state) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_pm_standby) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_pm_wakeup) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_security_erase_unit) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_smart_get_attributes) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_smart_selftest_abort) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_smart_selftest_start) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_type,
    GVariant *arg_options);

  gboolean (*handle_smart_update) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean  (*get_aam_enabled) (UDisksDriveAta *object);

  gboolean  (*get_aam_supported) (UDisksDriveAta *object);

  gint  (*get_aam_vendor_recommended_value) (UDisksDriveAta *object);

  gboolean  (*get_apm_enabled) (UDisksDriveAta *object);

  gboolean  (*get_apm_supported) (UDisksDriveAta *object);

  gboolean  (*get_pm_enabled) (UDisksDriveAta *object);

  gboolean  (*get_pm_supported) (UDisksDriveAta *object);

  gint  (*get_security_enhanced_erase_unit_minutes) (UDisksDriveAta *object);

  gint  (*get_security_erase_unit_minutes) (UDisksDriveAta *object);

  gboolean  (*get_security_frozen) (UDisksDriveAta *object);

  gboolean  (*get_smart_enabled) (UDisksDriveAta *object);

  gboolean  (*get_smart_failing) (UDisksDriveAta *object);

  gint  (*get_smart_num_attributes_failed_in_the_past) (UDisksDriveAta *object);

  gint  (*get_smart_num_attributes_failing) (UDisksDriveAta *object);

  gint64  (*get_smart_num_bad_sectors) (UDisksDriveAta *object);

  guint64  (*get_smart_power_on_seconds) (UDisksDriveAta *object);

  gint  (*get_smart_selftest_percent_remaining) (UDisksDriveAta *object);

  const gchar * (*get_smart_selftest_status) (UDisksDriveAta *object);

  gboolean  (*get_smart_supported) (UDisksDriveAta *object);

  gdouble  (*get_smart_temperature) (UDisksDriveAta *object);

  guint64  (*get_smart_updated) (UDisksDriveAta *object);

  gboolean (*handle_smart_set_enabled) (
    UDisksDriveAta *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_value,
    GVariant *arg_options);

  gboolean  (*get_write_cache_enabled) (UDisksDriveAta *object);

  gboolean  (*get_write_cache_supported) (UDisksDriveAta *object);

  gboolean  (*get_read_lookahead_enabled) (UDisksDriveAta *object);

  gboolean  (*get_read_lookahead_supported) (UDisksDriveAta *object);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.Drive.Ata.

struct UDisksDriveAtaProxy

struct UDisksDriveAtaProxy;

The UDisksDriveAtaProxy structure contains only private data and should only be accessed using the provided API.

struct UDisksDriveAtaProxyClass

struct UDisksDriveAtaProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksDriveAtaProxy.

struct UDisksDriveAtaSkeleton

struct UDisksDriveAtaSkeleton;

The UDisksDriveAtaSkeleton structure contains only private data and should only be accessed using the provided API.

struct UDisksDriveAtaSkeletonClass

struct UDisksDriveAtaSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksDriveAtaSkeleton.

The “aam-enabled” property

  “aam-enabled”              gboolean

Represents the D-Bus property "AamEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “aam-supported” property

  “aam-supported”            gboolean

Represents the D-Bus property "AamSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “aam-vendor-recommended-value” property

  “aam-vendor-recommended-value” gint

Represents the D-Bus property "AamVendorRecommendedValue".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “apm-enabled” property

  “apm-enabled”              gboolean

Represents the D-Bus property "ApmEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “apm-supported” property

  “apm-supported”            gboolean

Represents the D-Bus property "ApmSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “pm-enabled” property

  “pm-enabled”               gboolean

Represents the D-Bus property "PmEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “pm-supported” property

  “pm-supported”             gboolean

Represents the D-Bus property "PmSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “read-lookahead-enabled” property

  “read-lookahead-enabled”   gboolean

Represents the D-Bus property "ReadLookaheadEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

Since: 2.1.7

The “read-lookahead-supported” property

  “read-lookahead-supported” gboolean

Represents the D-Bus property "ReadLookaheadSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

Since: 2.1.7

The “security-enhanced-erase-unit-minutes” property

  “security-enhanced-erase-unit-minutes” gint

Represents the D-Bus property "SecurityEnhancedEraseUnitMinutes".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “security-erase-unit-minutes” property

  “security-erase-unit-minutes” gint

Represents the D-Bus property "SecurityEraseUnitMinutes".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “security-frozen” property

  “security-frozen”          gboolean

Represents the D-Bus property "SecurityFrozen".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “smart-enabled” property

  “smart-enabled”            gboolean

Represents the D-Bus property "SmartEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “smart-failing” property

  “smart-failing”            gboolean

Represents the D-Bus property "SmartFailing".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “smart-num-attributes-failed-in-the-past” property

  “smart-num-attributes-failed-in-the-past” gint

Represents the D-Bus property "SmartNumAttributesFailedInThePast".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-num-attributes-failing” property

  “smart-num-attributes-failing” gint

Represents the D-Bus property "SmartNumAttributesFailing".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-num-bad-sectors” property

  “smart-num-bad-sectors”    gint64

Represents the D-Bus property "SmartNumBadSectors".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-power-on-seconds” property

  “smart-power-on-seconds”   guint64

Represents the D-Bus property "SmartPowerOnSeconds".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-selftest-percent-remaining” property

  “smart-selftest-percent-remaining” gint

Represents the D-Bus property "SmartSelftestPercentRemaining".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-selftest-status” property

  “smart-selftest-status”    gchar *

Represents the D-Bus property "SmartSelftestStatus".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: NULL

The “smart-supported” property

  “smart-supported”          gboolean

Represents the D-Bus property "SmartSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

The “smart-temperature” property

  “smart-temperature”        gdouble

Represents the D-Bus property "SmartTemperature".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “smart-updated” property

  “smart-updated”            guint64

Represents the D-Bus property "SmartUpdated".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: 0

The “write-cache-enabled” property

  “write-cache-enabled”      gboolean

Represents the D-Bus property "WriteCacheEnabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

Since: 2.0.0

The “write-cache-supported” property

  “write-cache-supported”    gboolean

Represents the D-Bus property "WriteCacheSupported".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksDriveAta

Flags: Read / Write

Default value: FALSE

Since: 2.0.0

The “handle-pm-get-state” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the PmGetState() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_pm_get_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-pm-standby” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the PmStandby() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_pm_standby() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-pm-wakeup” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the PmWakeup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_pm_wakeup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-security-erase-unit” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SecurityEraseUnit() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_security_erase_unit() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-smart-get-attributes” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SmartGetAttributes() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_smart_get_attributes() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-smart-selftest-abort” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SmartSelftestAbort() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_smart_selftest_abort() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-smart-selftest-start” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_type,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SmartSelftestStart() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_smart_selftest_start() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-smart-set-enabled” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_value,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SmartSetEnabled() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_smart_set_enabled() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-smart-update” signal

gboolean
user_function (UDisksDriveAta        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SmartUpdate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_drive_ata_complete_smart_update() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last