udisks_mdraid_interface_info ()

GDBusInterfaceInfo *
udisks_mdraid_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.MDRaid D-Bus interface.

Since: 2.0.0

udisks_mdraid_override_properties ()

guint
udisks_mdraid_override_properties (GObjectClass *klass,
                                   guint property_id_begin);

Overrides all GObject properties in the UDisksMDRaid interface for a concrete class. The properties are overridden in the order they are defined.

Since: 2.0.0

udisks_mdraid_call_remove_device ()

void
udisks_mdraid_call_remove_device (UDisksMDRaid *proxy,
                                  const gchar *arg_device,
                                  GVariant *arg_options,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the RemoveDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_remove_device_finish() to get the result of the operation.

See udisks_mdraid_call_remove_device_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_remove_device_finish ()

gboolean
udisks_mdraid_call_remove_device_finish
                               (UDisksMDRaid *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_call_remove_device().

Since: 2.0.0

udisks_mdraid_call_remove_device_sync ()

gboolean
udisks_mdraid_call_remove_device_sync (UDisksMDRaid *proxy,
                                       const gchar *arg_device,
                                       GVariant *arg_options,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the RemoveDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_remove_device() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_remove_device ()

void
udisks_mdraid_complete_remove_device (UDisksMDRaid *object,
                                      GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the RemoveDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_add_device ()

void
udisks_mdraid_call_add_device (UDisksMDRaid *proxy,
                               const gchar *arg_device,
                               GVariant *arg_options,
                               GCancellable *cancellable,
                               GAsyncReadyCallback callback,
                               gpointer user_data);

Asynchronously invokes the AddDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_add_device_finish() to get the result of the operation.

See udisks_mdraid_call_add_device_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_add_device_finish ()

gboolean
udisks_mdraid_call_add_device_finish (UDisksMDRaid *proxy,
                                      GAsyncResult *res,
                                      GError **error);

Finishes an operation started with udisks_mdraid_call_add_device().

Since: 2.0.0

udisks_mdraid_call_add_device_sync ()

gboolean
udisks_mdraid_call_add_device_sync (UDisksMDRaid *proxy,
                                    const gchar *arg_device,
                                    GVariant *arg_options,
                                    GCancellable *cancellable,
                                    GError **error);

Synchronously invokes the AddDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_add_device() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_add_device ()

void
udisks_mdraid_complete_add_device (UDisksMDRaid *object,
                                   GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the AddDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_start ()

void
udisks_mdraid_call_start (UDisksMDRaid *proxy,
                          GVariant *arg_options,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously invokes the Start() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_start_finish() to get the result of the operation.

See udisks_mdraid_call_start_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_start_finish ()

gboolean
udisks_mdraid_call_start_finish (UDisksMDRaid *proxy,
                                 GAsyncResult *res,
                                 GError **error);

Finishes an operation started with udisks_mdraid_call_start().

Since: 2.0.0

udisks_mdraid_call_start_sync ()

gboolean
udisks_mdraid_call_start_sync (UDisksMDRaid *proxy,
                               GVariant *arg_options,
                               GCancellable *cancellable,
                               GError **error);

Synchronously invokes the Start() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_start() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_start ()

void
udisks_mdraid_complete_start (UDisksMDRaid *object,
                              GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Start() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_stop ()

void
udisks_mdraid_call_stop (UDisksMDRaid *proxy,
                         GVariant *arg_options,
                         GCancellable *cancellable,
                         GAsyncReadyCallback callback,
                         gpointer user_data);

Asynchronously invokes the Stop() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_stop_finish() to get the result of the operation.

See udisks_mdraid_call_stop_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_stop_finish ()

gboolean
udisks_mdraid_call_stop_finish (UDisksMDRaid *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_call_stop().

Since: 2.0.0

udisks_mdraid_call_stop_sync ()

gboolean
udisks_mdraid_call_stop_sync (UDisksMDRaid *proxy,
                              GVariant *arg_options,
                              GCancellable *cancellable,
                              GError **error);

Synchronously invokes the Stop() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_stop() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_stop ()

void
udisks_mdraid_complete_stop (UDisksMDRaid *object,
                             GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Stop() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_set_bitmap_location ()

void
udisks_mdraid_call_set_bitmap_location
                               (UDisksMDRaid *proxy,
                                const gchar *arg_value,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetBitmapLocation() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_set_bitmap_location_finish() to get the result of the operation.

See udisks_mdraid_call_set_bitmap_location_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_set_bitmap_location_finish ()

gboolean
udisks_mdraid_call_set_bitmap_location_finish
                               (UDisksMDRaid *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_call_set_bitmap_location().

Since: 2.0.0

udisks_mdraid_call_set_bitmap_location_sync ()

gboolean
udisks_mdraid_call_set_bitmap_location_sync
                               (UDisksMDRaid *proxy,
                                const gchar *arg_value,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetBitmapLocation() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_set_bitmap_location() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_set_bitmap_location ()

void
udisks_mdraid_complete_set_bitmap_location
                               (UDisksMDRaid *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SetBitmapLocation() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_request_sync_action ()

void
udisks_mdraid_call_request_sync_action
                               (UDisksMDRaid *proxy,
                                const gchar *arg_sync_action,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the RequestSyncAction() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_request_sync_action_finish() to get the result of the operation.

See udisks_mdraid_call_request_sync_action_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_request_sync_action_finish ()

gboolean
udisks_mdraid_call_request_sync_action_finish
                               (UDisksMDRaid *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_call_request_sync_action().

Since: 2.0.0

udisks_mdraid_call_request_sync_action_sync ()

gboolean
udisks_mdraid_call_request_sync_action_sync
                               (UDisksMDRaid *proxy,
                                const gchar *arg_sync_action,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the RequestSyncAction() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_request_sync_action() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_request_sync_action ()

void
udisks_mdraid_complete_request_sync_action
                               (UDisksMDRaid *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the RequestSyncAction() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_call_delete ()

void
udisks_mdraid_call_delete (UDisksMDRaid *proxy,
                           GVariant *arg_options,
                           GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Asynchronously invokes the Delete() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_call_delete_finish() to get the result of the operation.

See udisks_mdraid_call_delete_sync() for the synchronous, blocking version of this method.

Since: 2.0.0

udisks_mdraid_call_delete_finish ()

gboolean
udisks_mdraid_call_delete_finish (UDisksMDRaid *proxy,
                                  GAsyncResult *res,
                                  GError **error);

Finishes an operation started with udisks_mdraid_call_delete().

Since: 2.0.0

udisks_mdraid_call_delete_sync ()

gboolean
udisks_mdraid_call_delete_sync (UDisksMDRaid *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Delete() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_mdraid_call_delete() for the asynchronous version of this method.

Since: 2.0.0

udisks_mdraid_complete_delete ()

void
udisks_mdraid_complete_delete (UDisksMDRaid *object,
                               GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Delete() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.0.0

udisks_mdraid_get_active_devices ()

GVariant *
udisks_mdraid_get_active_devices (UDisksMDRaid *object);

Gets the value of the "ActiveDevices" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_bitmap_location ()

const gchar *
udisks_mdraid_get_bitmap_location (UDisksMDRaid *object);

Gets the value of the "BitmapLocation" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_chunk_size ()

guint64
udisks_mdraid_get_chunk_size (UDisksMDRaid *object);

Gets the value of the "ChunkSize" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_degraded ()

guint
udisks_mdraid_get_degraded (UDisksMDRaid *object);

Gets the value of the "Degraded" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_level ()

const gchar *
udisks_mdraid_get_level (UDisksMDRaid *object);

Gets the value of the "Level" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_name ()

const gchar *
udisks_mdraid_get_name (UDisksMDRaid *object);

Gets the value of the "Name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_num_devices ()

guint
udisks_mdraid_get_num_devices (UDisksMDRaid *object);

Gets the value of the "NumDevices" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_size ()

guint64
udisks_mdraid_get_size (UDisksMDRaid *object);

Gets the value of the "Size" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_sync_action ()

const gchar *
udisks_mdraid_get_sync_action (UDisksMDRaid *object);

Gets the value of the "SyncAction" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_sync_completed ()

gdouble
udisks_mdraid_get_sync_completed (UDisksMDRaid *object);

Gets the value of the "SyncCompleted" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_sync_rate ()

guint64
udisks_mdraid_get_sync_rate (UDisksMDRaid *object);

Gets the value of the "SyncRate" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_sync_remaining_time ()

guint64
udisks_mdraid_get_sync_remaining_time (UDisksMDRaid *object);

Gets the value of the "SyncRemainingTime" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_get_uuid ()

const gchar *
udisks_mdraid_get_uuid (UDisksMDRaid *object);

Gets the value of the "UUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_active_devices ()

GVariant *
udisks_mdraid_dup_active_devices (UDisksMDRaid *object);

Gets a copy of the "ActiveDevices" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_bitmap_location ()

gchar *
udisks_mdraid_dup_bitmap_location (UDisksMDRaid *object);

Gets a copy of the "BitmapLocation" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_level ()

gchar *
udisks_mdraid_dup_level (UDisksMDRaid *object);

Gets a copy of the "Level" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_name ()

gchar *
udisks_mdraid_dup_name (UDisksMDRaid *object);

Gets a copy of the "Name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_sync_action ()

gchar *
udisks_mdraid_dup_sync_action (UDisksMDRaid *object);

Gets a copy of the "SyncAction" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_dup_uuid ()

gchar *
udisks_mdraid_dup_uuid (UDisksMDRaid *object);

Gets a copy of the "UUID" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_active_devices ()

void
udisks_mdraid_set_active_devices (UDisksMDRaid *object,
                                  GVariant *value);

Sets the "ActiveDevices" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_bitmap_location ()

void
udisks_mdraid_set_bitmap_location (UDisksMDRaid *object,
                                   const gchar *value);

Sets the "BitmapLocation" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_chunk_size ()

void
udisks_mdraid_set_chunk_size (UDisksMDRaid *object,
                              guint64 value);

Sets the "ChunkSize" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_degraded ()

void
udisks_mdraid_set_degraded (UDisksMDRaid *object,
                            guint value);

Sets the "Degraded" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_level ()

void
udisks_mdraid_set_level (UDisksMDRaid *object,
                         const gchar *value);

Sets the "Level" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_name ()

void
udisks_mdraid_set_name (UDisksMDRaid *object,
                        const gchar *value);

Sets the "Name" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_num_devices ()

void
udisks_mdraid_set_num_devices (UDisksMDRaid *object,
                               guint value);

Sets the "NumDevices" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_size ()

void
udisks_mdraid_set_size (UDisksMDRaid *object,
                        guint64 value);

Sets the "Size" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_sync_action ()

void
udisks_mdraid_set_sync_action (UDisksMDRaid *object,
                               const gchar *value);

Sets the "SyncAction" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_sync_completed ()

void
udisks_mdraid_set_sync_completed (UDisksMDRaid *object,
                                  gdouble value);

Sets the "SyncCompleted" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_sync_rate ()

void
udisks_mdraid_set_sync_rate (UDisksMDRaid *object,
                             guint64 value);

Sets the "SyncRate" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_sync_remaining_time ()

void
udisks_mdraid_set_sync_remaining_time (UDisksMDRaid *object,
                                       guint64 value);

Sets the "SyncRemainingTime" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_set_uuid ()

void
udisks_mdraid_set_uuid (UDisksMDRaid *object,
                        const gchar *value);

Sets the "UUID" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.0.0

udisks_mdraid_proxy_new ()

void
udisks_mdraid_proxy_new (GDBusConnection *connection,
                         GDBusProxyFlags flags,
                         const gchar *name,
                         const gchar *object_path,
                         GCancellable *cancellable,
                         GAsyncReadyCallback callback,
                         gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.MDRaid. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_proxy_new_finish() to get the result of the operation.

See udisks_mdraid_proxy_new_sync() for the synchronous, blocking version of this constructor.

Since: 2.0.0

udisks_mdraid_proxy_new_finish ()

UDisksMDRaid *
udisks_mdraid_proxy_new_finish (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_proxy_new().

Since: 2.0.0

udisks_mdraid_proxy_new_sync ()

UDisksMDRaid *
udisks_mdraid_proxy_new_sync (GDBusConnection *connection,
                              GDBusProxyFlags flags,
                              const gchar *name,
                              const gchar *object_path,
                              GCancellable *cancellable,
                              GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.MDRaid. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_mdraid_proxy_new() for the asynchronous version of this constructor.

Since: 2.0.0

udisks_mdraid_proxy_new_for_bus ()

void
udisks_mdraid_proxy_new_for_bus (GBusType bus_type,
                                 GDBusProxyFlags flags,
                                 const gchar *name,
                                 const gchar *object_path,
                                 GCancellable *cancellable,
                                 GAsyncReadyCallback callback,
                                 gpointer user_data);

Like udisks_mdraid_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_mdraid_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_mdraid_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

Since: 2.0.0

udisks_mdraid_proxy_new_for_bus_finish ()

UDisksMDRaid *
udisks_mdraid_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_mdraid_proxy_new_for_bus().

Since: 2.0.0

udisks_mdraid_proxy_new_for_bus_sync ()

UDisksMDRaid *
udisks_mdraid_proxy_new_for_bus_sync (GBusType bus_type,
                                      GDBusProxyFlags flags,
                                      const gchar *name,
                                      const gchar *object_path,
                                      GCancellable *cancellable,
                                      GError **error);

Like udisks_mdraid_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_mdraid_proxy_new_for_bus() for the asynchronous version of this constructor.

Since: 2.0.0

udisks_mdraid_skeleton_new ()

UDisksMDRaid *
udisks_mdraid_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.MDRaid.

Since: 2.0.0

UDisksMDRaid

typedef struct _UDisksMDRaid UDisksMDRaid;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.MDRaid.

Since: 2.0.0

struct UDisksMDRaidIface

struct UDisksMDRaidIface {
  GTypeInterface parent_iface;


  gboolean (*handle_add_device) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_device,
    GVariant *arg_options);

  gboolean (*handle_delete) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_remove_device) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_device,
    GVariant *arg_options);

  gboolean (*handle_request_sync_action) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_sync_action,
    GVariant *arg_options);

  gboolean (*handle_set_bitmap_location) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_value,
    GVariant *arg_options);

  gboolean (*handle_start) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_stop) (
    UDisksMDRaid *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  GVariant * (*get_active_devices) (UDisksMDRaid *object);

  const gchar * (*get_bitmap_location) (UDisksMDRaid *object);

  GVariant * (*get_child_configuration) (UDisksMDRaid *object);

  guint64  (*get_chunk_size) (UDisksMDRaid *object);

  guint  (*get_degraded) (UDisksMDRaid *object);

  const gchar * (*get_level) (UDisksMDRaid *object);

  const gchar * (*get_name) (UDisksMDRaid *object);

  guint  (*get_num_devices) (UDisksMDRaid *object);

  gboolean  (*get_running) (UDisksMDRaid *object);

  guint64  (*get_size) (UDisksMDRaid *object);

  const gchar * (*get_sync_action) (UDisksMDRaid *object);

  gdouble  (*get_sync_completed) (UDisksMDRaid *object);

  guint64  (*get_sync_rate) (UDisksMDRaid *object);

  guint64  (*get_sync_remaining_time) (UDisksMDRaid *object);

  const gchar * (*get_uuid) (UDisksMDRaid *object);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.MDRaid.

Since: 2.0.0

struct UDisksMDRaidProxy

struct UDisksMDRaidProxy;

The UDisksMDRaidProxy structure contains only private data and should only be accessed using the provided API.

Since: 2.0.0

struct UDisksMDRaidProxyClass

struct UDisksMDRaidProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksMDRaidProxy.

Since: 2.0.0

struct UDisksMDRaidSkeleton

struct UDisksMDRaidSkeleton;

The UDisksMDRaidSkeleton structure contains only private data and should only be accessed using the provided API.

Since: 2.0.0

struct UDisksMDRaidSkeletonClass

struct UDisksMDRaidSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksMDRaidSkeleton.

Since: 2.0.0

The “active-devices” property

  “active-devices”           GVariant *

Represents the D-Bus property "ActiveDevices".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a(oiasta{sv})>

Default value: NULL

Since: 2.0.0

The “bitmap-location” property

  “bitmap-location”          gchar *

Represents the D-Bus property "BitmapLocation".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.0.0

The “child-configuration” property

  “child-configuration”      GVariant *

Represents the D-Bus property "ChildConfiguration".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Allowed values: GVariant<a(sa{sv})>

Default value: NULL

Since: 2.0.0

The “chunk-size” property

  “chunk-size”               guint64

Represents the D-Bus property "ChunkSize".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “degraded” property

  “degraded”                 guint

Represents the D-Bus property "Degraded".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “level” property

  “level”                    gchar *

Represents the D-Bus property "Level".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.0.0

The “name” property

  “name”                     gchar *

Represents the D-Bus property "Name".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.0.0

The “num-devices” property

  “num-devices”              guint

Represents the D-Bus property "NumDevices".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “running” property

  “running”                  gboolean

Represents the D-Bus property "Running".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: FALSE

Since: 2.0.0

The “size” property

  “size”                     guint64

Represents the D-Bus property "Size".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “sync-action” property

  “sync-action”              gchar *

Represents the D-Bus property "SyncAction".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.0.0

The “sync-completed” property

  “sync-completed”           gdouble

Represents the D-Bus property "SyncCompleted".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “sync-rate” property

  “sync-rate”                guint64

Represents the D-Bus property "SyncRate".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “sync-remaining-time” property

  “sync-remaining-time”      guint64

Represents the D-Bus property "SyncRemainingTime".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.0.0

The “uuid” property

  “uuid”                     gchar *

Represents the D-Bus property "UUID".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.0.0

The “handle-add-device” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_device,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the AddDevice() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_add_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-delete” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Delete() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_delete() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-remove-device” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_device,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the RemoveDevice() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_remove_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-request-sync-action” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_sync_action,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the RequestSyncAction() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_request_sync_action() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-set-bitmap-location” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_value,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetBitmapLocation() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_set_bitmap_location() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-start” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Start() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_start() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0

The “handle-stop” signal

gboolean
user_function (UDisksMDRaid          *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Stop() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_mdraid_complete_stop() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.0.0