udisks_block_vdo_call_deactivate ()

void
udisks_block_vdo_call_deactivate (UDisksBlockVDO *proxy,
                                  GVariant *arg_options,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the Deactivate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_deactivate_finish() to get the result of the operation.

See udisks_block_vdo_call_deactivate_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_deactivate_finish ()

gboolean
udisks_block_vdo_call_deactivate_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_deactivate().

Since: 2.8.0

udisks_block_vdo_call_deactivate_sync ()

gboolean
udisks_block_vdo_call_deactivate_sync (UDisksBlockVDO *proxy,
                                       GVariant *arg_options,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the Deactivate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_deactivate() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_enable_compression ()

void
udisks_block_vdo_call_enable_compression
                               (UDisksBlockVDO *proxy,
                                gboolean arg_enable,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the EnableCompression() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_enable_compression_finish() to get the result of the operation.

See udisks_block_vdo_call_enable_compression_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_enable_compression_finish ()

gboolean
udisks_block_vdo_call_enable_compression_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_enable_compression().

Since: 2.8.0

udisks_block_vdo_call_enable_compression_sync ()

gboolean
udisks_block_vdo_call_enable_compression_sync
                               (UDisksBlockVDO *proxy,
                                gboolean arg_enable,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the EnableCompression() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_enable_compression() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_enable_deduplication ()

void
udisks_block_vdo_call_enable_deduplication
                               (UDisksBlockVDO *proxy,
                                gboolean arg_enable,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the EnableDeduplication() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_enable_deduplication_finish() to get the result of the operation.

See udisks_block_vdo_call_enable_deduplication_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_enable_deduplication_finish ()

gboolean
udisks_block_vdo_call_enable_deduplication_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_enable_deduplication().

Since: 2.8.0

udisks_block_vdo_call_enable_deduplication_sync ()

gboolean
udisks_block_vdo_call_enable_deduplication_sync
                               (UDisksBlockVDO *proxy,
                                gboolean arg_enable,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the EnableDeduplication() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_enable_deduplication() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_change_write_policy ()

void
udisks_block_vdo_call_change_write_policy
                               (UDisksBlockVDO *proxy,
                                const gchar *arg_write_policy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the ChangeWritePolicy() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_change_write_policy_finish() to get the result of the operation.

See udisks_block_vdo_call_change_write_policy_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_change_write_policy_finish ()

gboolean
udisks_block_vdo_call_change_write_policy_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_change_write_policy().

Since: 2.8.0

udisks_block_vdo_call_change_write_policy_sync ()

gboolean
udisks_block_vdo_call_change_write_policy_sync
                               (UDisksBlockVDO *proxy,
                                const gchar *arg_write_policy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the ChangeWritePolicy() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_change_write_policy() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_remove ()

void
udisks_block_vdo_call_remove (UDisksBlockVDO *proxy,
                              gboolean arg_force,
                              GVariant *arg_options,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the Remove() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_remove_finish() to get the result of the operation.

See udisks_block_vdo_call_remove_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_remove_finish ()

gboolean
udisks_block_vdo_call_remove_finish (UDisksBlockVDO *proxy,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with udisks_block_vdo_call_remove().

Since: 2.8.0

udisks_block_vdo_call_remove_sync ()

gboolean
udisks_block_vdo_call_remove_sync (UDisksBlockVDO *proxy,
                                   gboolean arg_force,
                                   GVariant *arg_options,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the Remove() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_remove() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_stop ()

void
udisks_block_vdo_call_stop (UDisksBlockVDO *proxy,
                            gboolean arg_force,
                            GVariant *arg_options,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously invokes the Stop() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_stop_finish() to get the result of the operation.

See udisks_block_vdo_call_stop_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_stop_finish ()

gboolean
udisks_block_vdo_call_stop_finish (UDisksBlockVDO *proxy,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with udisks_block_vdo_call_stop().

Since: 2.8.0

udisks_block_vdo_call_stop_sync ()

gboolean
udisks_block_vdo_call_stop_sync (UDisksBlockVDO *proxy,
                                 gboolean arg_force,
                                 GVariant *arg_options,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously invokes the Stop() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_stop() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_grow_logical ()

void
udisks_block_vdo_call_grow_logical (UDisksBlockVDO *proxy,
                                    guint64 arg_size,
                                    GVariant *arg_options,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the GrowLogical() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_grow_logical_finish() to get the result of the operation.

See udisks_block_vdo_call_grow_logical_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_grow_logical_finish ()

gboolean
udisks_block_vdo_call_grow_logical_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_grow_logical().

Since: 2.8.0

udisks_block_vdo_call_grow_logical_sync ()

gboolean
udisks_block_vdo_call_grow_logical_sync
                               (UDisksBlockVDO *proxy,
                                guint64 arg_size,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GrowLogical() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_grow_logical() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_grow_physical ()

void
udisks_block_vdo_call_grow_physical (UDisksBlockVDO *proxy,
                                     GVariant *arg_options,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the GrowPhysical() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_grow_physical_finish() to get the result of the operation.

See udisks_block_vdo_call_grow_physical_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_grow_physical_finish ()

gboolean
udisks_block_vdo_call_grow_physical_finish
                               (UDisksBlockVDO *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_grow_physical().

Since: 2.8.0

udisks_block_vdo_call_grow_physical_sync ()

gboolean
udisks_block_vdo_call_grow_physical_sync
                               (UDisksBlockVDO *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GrowPhysical() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_grow_physical() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_call_get_statistics ()

void
udisks_block_vdo_call_get_statistics (UDisksBlockVDO *proxy,
                                      GVariant *arg_options,
                                      GCancellable *cancellable,
                                      GAsyncReadyCallback callback,
                                      gpointer user_data);

Asynchronously invokes the GetStatistics() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_call_get_statistics_finish() to get the result of the operation.

See udisks_block_vdo_call_get_statistics_sync() for the synchronous, blocking version of this method.

Since: 2.8.0

udisks_block_vdo_call_get_statistics_finish ()

gboolean
udisks_block_vdo_call_get_statistics_finish
                               (UDisksBlockVDO *proxy,
                                GVariant **out_stats,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_call_get_statistics().

Since: 2.8.0

udisks_block_vdo_call_get_statistics_sync ()

gboolean
udisks_block_vdo_call_get_statistics_sync
                               (UDisksBlockVDO *proxy,
                                GVariant *arg_options,
                                GVariant **out_stats,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GetStatistics() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_block_vdo_call_get_statistics() for the asynchronous version of this method.

Since: 2.8.0

udisks_block_vdo_complete_deactivate ()

void
udisks_block_vdo_complete_deactivate (UDisksBlockVDO *object,
                                      GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Deactivate() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_enable_compression ()

void
udisks_block_vdo_complete_enable_compression
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the EnableCompression() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_enable_deduplication ()

void
udisks_block_vdo_complete_enable_deduplication
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the EnableDeduplication() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_change_write_policy ()

void
udisks_block_vdo_complete_change_write_policy
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the ChangeWritePolicy() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_remove ()

void
udisks_block_vdo_complete_remove (UDisksBlockVDO *object,
                                  GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Remove() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_stop ()

void
udisks_block_vdo_complete_stop (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Stop() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_grow_logical ()

void
udisks_block_vdo_complete_grow_logical
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the GrowLogical() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_grow_physical ()

void
udisks_block_vdo_complete_grow_physical
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the GrowPhysical() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_complete_get_statistics ()

void
udisks_block_vdo_complete_get_statistics
                               (UDisksBlockVDO *object,
                                GDBusMethodInvocation *invocation,
                                GVariant *stats);

Helper function used in service implementations to finish handling invocations of the GetStatistics() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.8.0

udisks_block_vdo_get_name ()

const gchar *
udisks_block_vdo_get_name (UDisksBlockVDO *object);

Gets the value of the "Name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_dup_name ()

gchar *
udisks_block_vdo_dup_name (UDisksBlockVDO *object);

Gets a copy of the "Name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_name ()

void
udisks_block_vdo_set_name (UDisksBlockVDO *object,
                           const gchar *value);

Sets the "Name" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_active ()

gboolean
udisks_block_vdo_get_active (UDisksBlockVDO *object);

Gets the value of the "Active" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_active ()

void
udisks_block_vdo_set_active (UDisksBlockVDO *object,
                             gboolean value);

Sets the "Active" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_compression ()

gboolean
udisks_block_vdo_get_compression (UDisksBlockVDO *object);

Gets the value of the "Compression" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_compression ()

void
udisks_block_vdo_set_compression (UDisksBlockVDO *object,
                                  gboolean value);

Sets the "Compression" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_deduplication ()

gboolean
udisks_block_vdo_get_deduplication (UDisksBlockVDO *object);

Gets the value of the "Deduplication" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_deduplication ()

void
udisks_block_vdo_set_deduplication (UDisksBlockVDO *object,
                                    gboolean value);

Sets the "Deduplication" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_logical_size ()

guint64
udisks_block_vdo_get_logical_size (UDisksBlockVDO *object);

Gets the value of the "LogicalSize" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_logical_size ()

void
udisks_block_vdo_set_logical_size (UDisksBlockVDO *object,
                                   guint64 value);

Sets the "LogicalSize" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_physical_size ()

guint64
udisks_block_vdo_get_physical_size (UDisksBlockVDO *object);

Gets the value of the "PhysicalSize" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_physical_size ()

void
udisks_block_vdo_set_physical_size (UDisksBlockVDO *object,
                                    guint64 value);

Sets the "PhysicalSize" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_index_memory ()

guint64
udisks_block_vdo_get_index_memory (UDisksBlockVDO *object);

Gets the value of the "IndexMemory" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_index_memory ()

void
udisks_block_vdo_set_index_memory (UDisksBlockVDO *object,
                                   guint64 value);

Sets the "IndexMemory" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_get_write_policy ()

const gchar *
udisks_block_vdo_get_write_policy (UDisksBlockVDO *object);

Gets the value of the "WritePolicy" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_dup_write_policy ()

gchar *
udisks_block_vdo_dup_write_policy (UDisksBlockVDO *object);

Gets a copy of the "WritePolicy" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_set_write_policy ()

void
udisks_block_vdo_set_write_policy (UDisksBlockVDO *object,
                                   const gchar *value);

Sets the "WritePolicy" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.8.0

udisks_block_vdo_interface_info ()

GDBusInterfaceInfo *
udisks_block_vdo_interface_info (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.Block.VDO D-Bus interface.

Since: 2.8.0

udisks_block_vdo_override_properties ()

guint
udisks_block_vdo_override_properties (GObjectClass *klass,
                                      guint property_id_begin);

Overrides all GObject properties in the UDisksBlockVDO interface for a concrete class. The properties are overridden in the order they are defined.

Since: 2.8.0

udisks_block_vdo_proxy_new ()

void
udisks_block_vdo_proxy_new (GDBusConnection *connection,
                            GDBusProxyFlags flags,
                            const gchar *name,
                            const gchar *object_path,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Block.VDO. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_proxy_new_finish() to get the result of the operation.

See udisks_block_vdo_proxy_new_sync() for the synchronous, blocking version of this constructor.

Since: 2.8.0

udisks_block_vdo_proxy_new_finish ()

UDisksBlockVDO *
udisks_block_vdo_proxy_new_finish (GAsyncResult *res,
                                   GError **error);

Finishes an operation started with udisks_block_vdo_proxy_new().

Since: 2.8.0

udisks_block_vdo_proxy_new_sync ()

UDisksBlockVDO *
udisks_block_vdo_proxy_new_sync (GDBusConnection *connection,
                                 GDBusProxyFlags flags,
                                 const gchar *name,
                                 const gchar *object_path,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Block.VDO. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_block_vdo_proxy_new() for the asynchronous version of this constructor.

Since: 2.8.0

udisks_block_vdo_proxy_new_for_bus ()

void
udisks_block_vdo_proxy_new_for_bus (GBusType bus_type,
                                    GDBusProxyFlags flags,
                                    const gchar *name,
                                    const gchar *object_path,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Like udisks_block_vdo_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_block_vdo_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_block_vdo_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

Since: 2.8.0

udisks_block_vdo_proxy_new_for_bus_finish ()

UDisksBlockVDO *
udisks_block_vdo_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_block_vdo_proxy_new_for_bus().

Since: 2.8.0

udisks_block_vdo_proxy_new_for_bus_sync ()

UDisksBlockVDO *
udisks_block_vdo_proxy_new_for_bus_sync
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_block_vdo_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_block_vdo_proxy_new_for_bus() for the asynchronous version of this constructor.

Since: 2.8.0

udisks_block_vdo_skeleton_new ()

UDisksBlockVDO *
udisks_block_vdo_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.Block.VDO.

Since: 2.8.0

UDisksBlockVDO

typedef struct _UDisksBlockVDO UDisksBlockVDO;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.Block.VDO.

Since: 2.8.0

struct UDisksBlockVDOIface

struct UDisksBlockVDOIface {
  GTypeInterface parent_iface;


  gboolean (*handle_change_write_policy) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_write_policy,
    GVariant *arg_options);

  gboolean (*handle_deactivate) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_enable_compression) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_enable,
    GVariant *arg_options);

  gboolean (*handle_enable_deduplication) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_enable,
    GVariant *arg_options);

  gboolean (*handle_get_statistics) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_grow_logical) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    guint64 arg_size,
    GVariant *arg_options);

  gboolean (*handle_grow_physical) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_remove) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_force,
    GVariant *arg_options);

  gboolean (*handle_stop) (
    UDisksBlockVDO *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_force,
    GVariant *arg_options);

  gboolean  (*get_active) (UDisksBlockVDO *object);

  gboolean  (*get_compression) (UDisksBlockVDO *object);

  gboolean  (*get_deduplication) (UDisksBlockVDO *object);

  guint64  (*get_index_memory) (UDisksBlockVDO *object);

  guint64  (*get_logical_size) (UDisksBlockVDO *object);

  const gchar * (*get_name) (UDisksBlockVDO *object);

  guint64  (*get_physical_size) (UDisksBlockVDO *object);

  const gchar * (*get_write_policy) (UDisksBlockVDO *object);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.Block.VDO.

Since: 2.8.0

struct UDisksBlockVDOProxy

struct UDisksBlockVDOProxy {
};

The UDisksBlockVDOProxy structure contains only private data and should only be accessed using the provided API.

Since: 2.8.0

struct UDisksBlockVDOProxyClass

struct UDisksBlockVDOProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksBlockVDOProxy.

Since: 2.8.0

struct UDisksBlockVDOSkeleton

struct UDisksBlockVDOSkeleton {
};

The UDisksBlockVDOSkeleton structure contains only private data and should only be accessed using the provided API.

Since: 2.8.0

struct UDisksBlockVDOSkeletonClass

struct UDisksBlockVDOSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksBlockVDOSkeleton.

Since: 2.8.0

The “active” property

  “active”                   gboolean

Represents the D-Bus property "Active".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: FALSE

Since: 2.8.0

The “compression” property

  “compression”              gboolean

Represents the D-Bus property "Compression".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: FALSE

Since: 2.8.0

The “deduplication” property

  “deduplication”            gboolean

Represents the D-Bus property "Deduplication".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: FALSE

Since: 2.8.0

The “index-memory” property

  “index-memory”             guint64

Represents the D-Bus property "IndexMemory".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.8.0

The “logical-size” property

  “logical-size”             guint64

Represents the D-Bus property "LogicalSize".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.8.0

The “name” property

  “name”                     gchar *

Represents the D-Bus property "Name".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.8.0

The “physical-size” property

  “physical-size”            guint64

Represents the D-Bus property "PhysicalSize".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.8.0

The “write-policy” property

  “write-policy”             gchar *

Represents the D-Bus property "WritePolicy".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.8.0

The “handle-change-write-policy” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_write_policy,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ChangeWritePolicy() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_change_write_policy() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-deactivate” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Deactivate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_deactivate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-enable-compression” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_enable,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the EnableCompression() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_enable_compression() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-enable-deduplication” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_enable,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the EnableDeduplication() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_enable_deduplication() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-get-statistics” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GetStatistics() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_get_statistics() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-grow-logical” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               guint64                arg_size,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GrowLogical() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_grow_logical() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-grow-physical” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GrowPhysical() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_grow_physical() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-remove” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_force,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Remove() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_remove() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0

The “handle-stop” signal

gboolean
user_function (UDisksBlockVDO        *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_force,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Stop() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_block_vdo_complete_stop() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.8.0