udisks_filesystem_btrfs_call_add_device ()

void
udisks_filesystem_btrfs_call_add_device
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_device,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the AddDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_add_device_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_add_device_sync() for the synchronous, blocking version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_add_device_finish ()

gboolean
udisks_filesystem_btrfs_call_add_device_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_add_device().

Since: 2.3.0

udisks_filesystem_btrfs_call_add_device_sync ()

gboolean
udisks_filesystem_btrfs_call_add_device_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_device,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the AddDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_add_device() for the asynchronous version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_create_snapshot ()

void
udisks_filesystem_btrfs_call_create_snapshot
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_source,
                                const gchar *arg_dest,
                                gboolean arg_ro,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CreateSnapshot() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_create_snapshot_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_create_snapshot_sync() for the synchronous, blocking version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_create_snapshot_finish ()

gboolean
udisks_filesystem_btrfs_call_create_snapshot_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_create_snapshot().

Since: 2.1.3

udisks_filesystem_btrfs_call_create_snapshot_sync ()

gboolean
udisks_filesystem_btrfs_call_create_snapshot_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_source,
                                const gchar *arg_dest,
                                gboolean arg_ro,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CreateSnapshot() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_create_snapshot() for the asynchronous version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_create_subvolume ()

void
udisks_filesystem_btrfs_call_create_subvolume
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_name,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CreateSubvolume() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_create_subvolume_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_create_subvolume_sync() for the synchronous, blocking version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_create_subvolume_finish ()

gboolean
udisks_filesystem_btrfs_call_create_subvolume_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_create_subvolume().

Since: 2.1.3

udisks_filesystem_btrfs_call_create_subvolume_sync ()

gboolean
udisks_filesystem_btrfs_call_create_subvolume_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_name,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CreateSubvolume() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_create_subvolume() for the asynchronous version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_get_subvolumes ()

void
udisks_filesystem_btrfs_call_get_subvolumes
                               (UDisksFilesystemBTRFS *proxy,
                                gboolean arg_snapshots_only,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the GetSubvolumes() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_get_subvolumes_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_get_subvolumes_sync() for the synchronous, blocking version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_get_subvolumes_finish ()

gboolean
udisks_filesystem_btrfs_call_get_subvolumes_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GVariant **out_subvolumes,
                                gint *out_subvolumes_cnt,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_get_subvolumes().

Since: 2.1.3

udisks_filesystem_btrfs_call_get_subvolumes_sync ()

gboolean
udisks_filesystem_btrfs_call_get_subvolumes_sync
                               (UDisksFilesystemBTRFS *proxy,
                                gboolean arg_snapshots_only,
                                GVariant *arg_options,
                                GVariant **out_subvolumes,
                                gint *out_subvolumes_cnt,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GetSubvolumes() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_get_subvolumes() for the asynchronous version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_remove_device ()

void
udisks_filesystem_btrfs_call_remove_device
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_device,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the RemoveDevice() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_remove_device_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_remove_device_sync() for the synchronous, blocking version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_remove_device_finish ()

gboolean
udisks_filesystem_btrfs_call_remove_device_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_remove_device().

Since: 2.3.0

udisks_filesystem_btrfs_call_remove_device_sync ()

gboolean
udisks_filesystem_btrfs_call_remove_device_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_device,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the RemoveDevice() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_remove_device() for the asynchronous version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_remove_subvolume ()

void
udisks_filesystem_btrfs_call_remove_subvolume
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_name,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the RemoveSubvolume() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_remove_subvolume_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_remove_subvolume_sync() for the synchronous, blocking version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_remove_subvolume_finish ()

gboolean
udisks_filesystem_btrfs_call_remove_subvolume_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_remove_subvolume().

Since: 2.1.3

udisks_filesystem_btrfs_call_remove_subvolume_sync ()

gboolean
udisks_filesystem_btrfs_call_remove_subvolume_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_name,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the RemoveSubvolume() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_remove_subvolume() for the asynchronous version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_repair ()

void
udisks_filesystem_btrfs_call_repair (UDisksFilesystemBTRFS *proxy,
                                     GVariant *arg_options,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the Repair() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_repair_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_repair_sync() for the synchronous, blocking version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_repair_finish ()

gboolean
udisks_filesystem_btrfs_call_repair_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_repair().

Since: 2.3.0

udisks_filesystem_btrfs_call_repair_sync ()

gboolean
udisks_filesystem_btrfs_call_repair_sync
                               (UDisksFilesystemBTRFS *proxy,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Repair() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_repair() for the asynchronous version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_resize ()

void
udisks_filesystem_btrfs_call_resize (UDisksFilesystemBTRFS *proxy,
                                     guint64 arg_size,
                                     GVariant *arg_options,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the Resize() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_resize_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_resize_sync() for the synchronous, blocking version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_resize_finish ()

gboolean
udisks_filesystem_btrfs_call_resize_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_resize().

Since: 2.3.0

udisks_filesystem_btrfs_call_resize_sync ()

gboolean
udisks_filesystem_btrfs_call_resize_sync
                               (UDisksFilesystemBTRFS *proxy,
                                guint64 arg_size,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Resize() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_resize() for the asynchronous version of this method.

Since: 2.3.0

udisks_filesystem_btrfs_call_set_label ()

void
udisks_filesystem_btrfs_call_set_label
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_label,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetLabel() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_call_set_label_finish() to get the result of the operation.

See udisks_filesystem_btrfs_call_set_label_sync() for the synchronous, blocking version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_call_set_label_finish ()

gboolean
udisks_filesystem_btrfs_call_set_label_finish
                               (UDisksFilesystemBTRFS *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_call_set_label().

Since: 2.1.3

udisks_filesystem_btrfs_call_set_label_sync ()

gboolean
udisks_filesystem_btrfs_call_set_label_sync
                               (UDisksFilesystemBTRFS *proxy,
                                const gchar *arg_label,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetLabel() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_call_set_label() for the asynchronous version of this method.

Since: 2.1.3

udisks_filesystem_btrfs_complete_add_device ()

void
udisks_filesystem_btrfs_complete_add_device
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the AddDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.3.0

udisks_filesystem_btrfs_complete_create_snapshot ()

void
udisks_filesystem_btrfs_complete_create_snapshot
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the CreateSnapshot() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.1.3

udisks_filesystem_btrfs_complete_create_subvolume ()

void
udisks_filesystem_btrfs_complete_create_subvolume
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the CreateSubvolume() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.1.3

udisks_filesystem_btrfs_complete_get_subvolumes ()

void
udisks_filesystem_btrfs_complete_get_subvolumes
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation,
                                GVariant *subvolumes,
                                gint subvolumes_cnt);

Helper function used in service implementations to finish handling invocations of the GetSubvolumes() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.1.3

udisks_filesystem_btrfs_complete_remove_device ()

void
udisks_filesystem_btrfs_complete_remove_device
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the RemoveDevice() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.3.0

udisks_filesystem_btrfs_complete_remove_subvolume ()

void
udisks_filesystem_btrfs_complete_remove_subvolume
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the RemoveSubvolume() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.1.3

udisks_filesystem_btrfs_complete_repair ()

void
udisks_filesystem_btrfs_complete_repair
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Repair() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.3.0

udisks_filesystem_btrfs_complete_resize ()

void
udisks_filesystem_btrfs_complete_resize
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Resize() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.3.0

udisks_filesystem_btrfs_complete_set_label ()

void
udisks_filesystem_btrfs_complete_set_label
                               (UDisksFilesystemBTRFS *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the SetLabel() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Since: 2.1.3

udisks_filesystem_btrfs_dup_label ()

gchar *
udisks_filesystem_btrfs_dup_label (UDisksFilesystemBTRFS *object);

Gets a copy of the "label" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_dup_uuid ()

gchar *
udisks_filesystem_btrfs_dup_uuid (UDisksFilesystemBTRFS *object);

Gets a copy of the "uuid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_get_label ()

const gchar *
udisks_filesystem_btrfs_get_label (UDisksFilesystemBTRFS *object);

Gets the value of the "label" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_get_num_devices ()

guint64
udisks_filesystem_btrfs_get_num_devices
                               (UDisksFilesystemBTRFS *object);

Gets the value of the "num_devices" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_get_used ()

guint64
udisks_filesystem_btrfs_get_used (UDisksFilesystemBTRFS *object);

Gets the value of the "used" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_get_uuid ()

const gchar *
udisks_filesystem_btrfs_get_uuid (UDisksFilesystemBTRFS *object);

Gets the value of the "uuid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_interface_info ()

GDBusInterfaceInfo *
udisks_filesystem_btrfs_interface_info
                               (void);

Gets a machine-readable description of the org.freedesktop.UDisks2.Filesystem.BTRFS D-Bus interface.

Since: 2.1.3

udisks_filesystem_btrfs_override_properties ()

guint
udisks_filesystem_btrfs_override_properties
                               (GObjectClass *klass,
                                guint property_id_begin);

Overrides all GObject properties in the UDisksFilesystemBTRFS interface for a concrete class. The properties are overridden in the order they are defined.

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new ()

void
udisks_filesystem_btrfs_proxy_new (GDBusConnection *connection,
                                   GDBusProxyFlags flags,
                                   const gchar *name,
                                   const gchar *object_path,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Filesystem.BTRFS. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_proxy_new_finish() to get the result of the operation.

See udisks_filesystem_btrfs_proxy_new_sync() for the synchronous, blocking version of this constructor.

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new_finish ()

UDisksFilesystemBTRFS *
udisks_filesystem_btrfs_proxy_new_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_proxy_new().

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new_for_bus ()

void
udisks_filesystem_btrfs_proxy_new_for_bus
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Like udisks_filesystem_btrfs_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call udisks_filesystem_btrfs_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_filesystem_btrfs_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new_for_bus_finish ()

UDisksFilesystemBTRFS *
udisks_filesystem_btrfs_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_filesystem_btrfs_proxy_new_for_bus().

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new_for_bus_sync ()

UDisksFilesystemBTRFS *
udisks_filesystem_btrfs_proxy_new_for_bus_sync
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_filesystem_btrfs_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_proxy_new_for_bus() for the asynchronous version of this constructor.

Since: 2.1.3

udisks_filesystem_btrfs_proxy_new_sync ()

UDisksFilesystemBTRFS *
udisks_filesystem_btrfs_proxy_new_sync
                               (GDBusConnection *connection,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.Filesystem.BTRFS. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_filesystem_btrfs_proxy_new() for the asynchronous version of this constructor.

Since: 2.1.3

udisks_filesystem_btrfs_set_label ()

void
udisks_filesystem_btrfs_set_label (UDisksFilesystemBTRFS *object,
                                   const gchar *value);

Sets the "label" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_set_num_devices ()

void
udisks_filesystem_btrfs_set_num_devices
                               (UDisksFilesystemBTRFS *object,
                                guint64 value);

Sets the "num_devices" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_set_used ()

void
udisks_filesystem_btrfs_set_used (UDisksFilesystemBTRFS *object,
                                  guint64 value);

Sets the "used" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_set_uuid ()

void
udisks_filesystem_btrfs_set_uuid (UDisksFilesystemBTRFS *object,
                                  const gchar *value);

Sets the "uuid" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Since: 2.1.3

udisks_filesystem_btrfs_skeleton_new ()

UDisksFilesystemBTRFS *
udisks_filesystem_btrfs_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.Filesystem.BTRFS.

Since: 2.1.3

UDisksFilesystemBTRFS

typedef struct _UDisksFilesystemBTRFS UDisksFilesystemBTRFS;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.Filesystem.BTRFS.

Since: 2.1.3

struct UDisksFilesystemBTRFSIface

struct UDisksFilesystemBTRFSIface {
  GTypeInterface parent_iface;


  gboolean (*handle_create_snapshot) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_source,
    const gchar *arg_dest,
    gboolean arg_ro,
    GVariant *arg_options);

  gboolean (*handle_create_subvolume) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_name,
    GVariant *arg_options);

  gboolean (*handle_get_subvolumes) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    gboolean arg_snapshots_only,
    GVariant *arg_options);

  gboolean (*handle_remove_subvolume) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_name,
    GVariant *arg_options);

  gboolean (*handle_set_label) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_label,
    GVariant *arg_options);

  const gchar * (*get_label) (UDisksFilesystemBTRFS *object);

  guint64  (*get_num_devices) (UDisksFilesystemBTRFS *object);

  guint64  (*get_used) (UDisksFilesystemBTRFS *object);

  const gchar * (*get_uuid) (UDisksFilesystemBTRFS *object);

  gboolean (*handle_add_device) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_device,
    GVariant *arg_options);

  gboolean (*handle_remove_device) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_device,
    GVariant *arg_options);

  gboolean (*handle_repair) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_options);

  gboolean (*handle_resize) (
    UDisksFilesystemBTRFS *object,
    GDBusMethodInvocation *invocation,
    guint64 arg_size,
    GVariant *arg_options);
};

Virtual table for the D-Bus interface org.freedesktop.UDisks2.Filesystem.BTRFS.

Since: 2.1.3

struct UDisksFilesystemBTRFSProxy

struct UDisksFilesystemBTRFSProxy;

The UDisksFilesystemBTRFSProxy structure contains only private data and should only be accessed using the provided API.

Since: 2.1.3

struct UDisksFilesystemBTRFSProxyClass

struct UDisksFilesystemBTRFSProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksFilesystemBTRFSProxy.

Since: 2.1.3

struct UDisksFilesystemBTRFSSkeleton

struct UDisksFilesystemBTRFSSkeleton;

The UDisksFilesystemBTRFSSkeleton structure contains only private data and should only be accessed using the provided API.

Since: 2.1.3

struct UDisksFilesystemBTRFSSkeletonClass

struct UDisksFilesystemBTRFSSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksFilesystemBTRFSSkeleton.

Since: 2.1.3

The “label” property

  “label”                    gchar *

Represents the D-Bus property "label".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.1.3

The “num-devices” property

  “num-devices”              guint64

Represents the D-Bus property "num_devices".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.1.3

The “used” property

  “used”                     guint64

Represents the D-Bus property "used".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: 0

Since: 2.1.3

The “uuid” property

  “uuid”                     gchar *

Represents the D-Bus property "uuid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Flags: Read / Write

Default value: NULL

Since: 2.1.3

The “handle-add-device” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_device,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the AddDevice() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_add_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.3.0

The “handle-create-snapshot” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_source,
               gchar                 *arg_dest,
               gboolean               arg_ro,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CreateSnapshot() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_create_snapshot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.1.3

The “handle-create-subvolume” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_name,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CreateSubvolume() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_create_subvolume() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.1.3

The “handle-get-subvolumes” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gboolean               arg_snapshots_only,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GetSubvolumes() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_get_subvolumes() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.1.3

The “handle-remove-device” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_device,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the RemoveDevice() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_remove_device() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.3.0

The “handle-remove-subvolume” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_name,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the RemoveSubvolume() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_remove_subvolume() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.1.3

The “handle-repair” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Repair() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_repair() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.3.0

The “handle-resize” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               guint64                arg_size,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Resize() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_resize() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.3.0

The “handle-set-label” signal

gboolean
user_function (UDisksFilesystemBTRFS *object,
               GDBusMethodInvocation *invocation,
               gchar                 *arg_label,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetLabel() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_filesystem_btrfs_complete_set_label() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

Since: 2.1.3