UDisksISCSISession

UDisksISCSISession — Generated C code for the org.freedesktop.UDisks2.ISCSI.Session D-Bus interface

Functions

void udisks_iscsi_session_proxy_new ()
UDisksISCSISession * udisks_iscsi_session_proxy_new_finish ()
UDisksISCSISession * udisks_iscsi_session_proxy_new_sync ()
void udisks_iscsi_session_proxy_new_for_bus ()
UDisksISCSISession * udisks_iscsi_session_proxy_new_for_bus_finish ()
UDisksISCSISession * udisks_iscsi_session_proxy_new_for_bus_sync ()
gint udisks_iscsi_session_get_abort_timeout ()
void udisks_iscsi_session_set_abort_timeout ()
const gchar * udisks_iscsi_session_get_address ()
gchar * udisks_iscsi_session_dup_address ()
void udisks_iscsi_session_set_address ()
gint udisks_iscsi_session_get_lu_reset_timeout ()
void udisks_iscsi_session_set_lu_reset_timeout ()
const gchar * udisks_iscsi_session_get_persistent_address ()
gchar * udisks_iscsi_session_dup_persistent_address ()
void udisks_iscsi_session_set_persistent_address ()
gint udisks_iscsi_session_get_persistent_port ()
void udisks_iscsi_session_set_persistent_port ()
gint udisks_iscsi_session_get_port ()
void udisks_iscsi_session_set_port ()
gint udisks_iscsi_session_get_recovery_timeout ()
void udisks_iscsi_session_set_recovery_timeout ()
const gchar * udisks_iscsi_session_get_target_name ()
gchar * udisks_iscsi_session_dup_target_name ()
void udisks_iscsi_session_set_target_name ()
gint udisks_iscsi_session_get_tgt_reset_timeout ()
void udisks_iscsi_session_set_tgt_reset_timeout ()
gint udisks_iscsi_session_get_tpgt ()
void udisks_iscsi_session_set_tpgt ()
void udisks_iscsi_session_call_logout ()
gboolean udisks_iscsi_session_call_logout_finish ()
gboolean udisks_iscsi_session_call_logout_sync ()
void udisks_iscsi_session_call_logout_interface ()
gboolean udisks_iscsi_session_call_logout_interface_finish ()
gboolean udisks_iscsi_session_call_logout_interface_sync ()
UDisksISCSISession * udisks_iscsi_session_skeleton_new ()
void udisks_iscsi_session_complete_logout ()
void udisks_iscsi_session_complete_logout_interface ()

Properties

int abort-timeout Read / Write
char * address Read / Write
int lu-reset-timeout Read / Write
char * persistent-address Read / Write
int persistent-port Read / Write
int port Read / Write
int recovery-timeout Read / Write
char * target-name Read / Write
int tgt-reset-timeout Read / Write
int tpgt Read / Write

Signals

Types and Values

Object Hierarchy

    GInterface
    ╰── UDisksISCSISession
    GObject
    ├── GDBusInterfaceSkeleton
       ╰── UDisksISCSISessionSkeleton
    ╰── GDBusProxy
        ╰── UDisksISCSISessionProxy

Prerequisites

UDisksISCSISession requires GObject.

Implemented Interfaces

UDisksISCSISessionProxy implements GDBusInterface, GInitable, GAsyncInitable and UDisksISCSISession.

UDisksISCSISessionSkeleton implements GDBusInterface and UDisksISCSISession.

Known Implementations

UDisksISCSISession is implemented by UDisksISCSISessionProxy and UDisksISCSISessionSkeleton.

Description

This section contains code for working with the org.freedesktop.UDisks2.ISCSI.Session D-Bus interface in C.

Functions

udisks_iscsi_session_proxy_new ()

void
udisks_iscsi_session_proxy_new (GDBusConnection *connection,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.ISCSI.Session. See g_dbus_proxy_new() for more details.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_iscsi_session_proxy_new_finish() to get the result of the operation.

See udisks_iscsi_session_proxy_new_sync() for the synchronous, blocking version of this constructor.

Parameters

connection

A GDBusConnection.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique) or NULL if connection is not a message bus connection.

[nullable]

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied.

 

user_data

User data to pass to callback .

 

udisks_iscsi_session_proxy_new_finish ()

UDisksISCSISession *
udisks_iscsi_session_proxy_new_finish (GAsyncResult *res,
                                       GError **error);

Finishes an operation started with udisks_iscsi_session_proxy_new().

Parameters

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_iscsi_session_proxy_new().

 

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksISCSISessionProxy]


udisks_iscsi_session_proxy_new_sync ()

UDisksISCSISession *
udisks_iscsi_session_proxy_new_sync (GDBusConnection *connection,
                                     GDBusProxyFlags flags,
                                     const gchar *name,
                                     const gchar *object_path,
                                     GCancellable *cancellable,
                                     GError **error);

Synchronously creates a proxy for the D-Bus interface org.freedesktop.UDisks2.ISCSI.Session. See g_dbus_proxy_new_sync() for more details.

The calling thread is blocked until a reply is received.

See udisks_iscsi_session_proxy_new() for the asynchronous version of this constructor.

Parameters

connection

A GDBusConnection.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique) or NULL if connection is not a message bus connection.

[nullable]

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksISCSISessionProxy]


udisks_iscsi_session_proxy_new_for_bus ()

void
udisks_iscsi_session_proxy_new_for_bus
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Like udisks_iscsi_session_proxy_new() but takes a GBusType instead of a GDBusConnection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_iscsi_session_proxy_new_for_bus_finish() to get the result of the operation.

See udisks_iscsi_session_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.

Parameters

bus_type

A GBusType.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique).

 

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied.

 

user_data

User data to pass to callback .

 

udisks_iscsi_session_proxy_new_for_bus_finish ()

UDisksISCSISession *
udisks_iscsi_session_proxy_new_for_bus_finish
                               (GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_iscsi_session_proxy_new_for_bus().

Parameters

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_iscsi_session_proxy_new_for_bus().

 

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksISCSISessionProxy]


udisks_iscsi_session_proxy_new_for_bus_sync ()

UDisksISCSISession *
udisks_iscsi_session_proxy_new_for_bus_sync
                               (GBusType bus_type,
                                GDBusProxyFlags flags,
                                const gchar *name,
                                const gchar *object_path,
                                GCancellable *cancellable,
                                GError **error);

Like udisks_iscsi_session_proxy_new_sync() but takes a GBusType instead of a GDBusConnection.

The calling thread is blocked until a reply is received.

See udisks_iscsi_session_proxy_new_for_bus() for the asynchronous version of this constructor.

Parameters

bus_type

A GBusType.

 

flags

Flags from the GDBusProxyFlags enumeration.

 

name

A bus name (well-known or unique).

 

object_path

An object path.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL

 

Returns

The constructed proxy object or NULL if error is set.

[transfer full][type UDisksISCSISessionProxy]


udisks_iscsi_session_get_abort_timeout ()

gint
udisks_iscsi_session_get_abort_timeout
                               (UDisksISCSISession *object);

Gets the value of the "abort_timeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_abort_timeout ()

void
udisks_iscsi_session_set_abort_timeout
                               (UDisksISCSISession *object,
                                gint value);

Sets the "abort_timeout" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_address ()

const gchar *
udisks_iscsi_session_get_address (UDisksISCSISession *object);

Gets the value of the "address" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_iscsi_session_dup_address() if on another thread.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_iscsi_session_dup_address ()

gchar *
udisks_iscsi_session_dup_address (UDisksISCSISession *object);

Gets a copy of the "address" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_iscsi_session_set_address ()

void
udisks_iscsi_session_set_address (UDisksISCSISession *object,
                                  const gchar *value);

Sets the "address" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_lu_reset_timeout ()

gint
udisks_iscsi_session_get_lu_reset_timeout
                               (UDisksISCSISession *object);

Gets the value of the "lu_reset_timeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_lu_reset_timeout ()

void
udisks_iscsi_session_set_lu_reset_timeout
                               (UDisksISCSISession *object,
                                gint value);

Sets the "lu_reset_timeout" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_persistent_address ()

const gchar *
udisks_iscsi_session_get_persistent_address
                               (UDisksISCSISession *object);

Gets the value of the "persistent_address" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_iscsi_session_dup_persistent_address() if on another thread.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_iscsi_session_dup_persistent_address ()

gchar *
udisks_iscsi_session_dup_persistent_address
                               (UDisksISCSISession *object);

Gets a copy of the "persistent_address" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_iscsi_session_set_persistent_address ()

void
udisks_iscsi_session_set_persistent_address
                               (UDisksISCSISession *object,
                                const gchar *value);

Sets the "persistent_address" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_persistent_port ()

gint
udisks_iscsi_session_get_persistent_port
                               (UDisksISCSISession *object);

Gets the value of the "persistent_port" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_persistent_port ()

void
udisks_iscsi_session_set_persistent_port
                               (UDisksISCSISession *object,
                                gint value);

Sets the "persistent_port" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_port ()

gint
udisks_iscsi_session_get_port (UDisksISCSISession *object);

Gets the value of the "port" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_port ()

void
udisks_iscsi_session_set_port (UDisksISCSISession *object,
                               gint value);

Sets the "port" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_recovery_timeout ()

gint
udisks_iscsi_session_get_recovery_timeout
                               (UDisksISCSISession *object);

Gets the value of the "recovery_timeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_recovery_timeout ()

void
udisks_iscsi_session_set_recovery_timeout
                               (UDisksISCSISession *object,
                                gint value);

Sets the "recovery_timeout" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_target_name ()

const gchar *
udisks_iscsi_session_get_target_name (UDisksISCSISession *object);

Gets the value of the "target_name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use udisks_iscsi_session_dup_target_name() if on another thread.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. Do not free the returned value, it belongs to object .

[transfer none][nullable]


udisks_iscsi_session_dup_target_name ()

gchar *
udisks_iscsi_session_dup_target_name (UDisksISCSISession *object);

Gets a copy of the "target_name" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value or NULL if the property is not set. The returned value should be freed with g_free().

[transfer full][nullable]


udisks_iscsi_session_set_target_name ()

void
udisks_iscsi_session_set_target_name (UDisksISCSISession *object,
                                      const gchar *value);

Sets the "target_name" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_tgt_reset_timeout ()

gint
udisks_iscsi_session_get_tgt_reset_timeout
                               (UDisksISCSISession *object);

Gets the value of the "tgt_reset_timeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_tgt_reset_timeout ()

void
udisks_iscsi_session_set_tgt_reset_timeout
                               (UDisksISCSISession *object,
                                gint value);

Sets the "tgt_reset_timeout" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_get_tpgt ()

gint
udisks_iscsi_session_get_tpgt (UDisksISCSISession *object);

Gets the value of the "tpgt" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

Returns

The property value.


udisks_iscsi_session_set_tpgt ()

void
udisks_iscsi_session_set_tpgt (UDisksISCSISession *object,
                               gint value);

Sets the "tpgt" D-Bus property to value .

Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.

[skip]

Parameters

object

A UDisksISCSISession.

 

value

The value to set.

 

udisks_iscsi_session_call_logout ()

void
udisks_iscsi_session_call_logout (UDisksISCSISession *proxy,
                                  GVariant *arg_options,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the Logout() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_iscsi_session_call_logout_finish() to get the result of the operation.

See udisks_iscsi_session_call_logout_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksISCSISessionProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.1.3


udisks_iscsi_session_call_logout_finish ()

gboolean
udisks_iscsi_session_call_logout_finish
                               (UDisksISCSISession *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_iscsi_session_call_logout().

Parameters

proxy

A UDisksISCSISessionProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_iscsi_session_call_logout().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.1.3


udisks_iscsi_session_call_logout_sync ()

gboolean
udisks_iscsi_session_call_logout_sync (UDisksISCSISession *proxy,
                                       GVariant *arg_options,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the Logout() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_iscsi_session_call_logout() for the asynchronous version of this method.

Parameters

proxy

A UDisksISCSISessionProxy.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.1.3


udisks_iscsi_session_call_logout_interface ()

void
udisks_iscsi_session_call_logout_interface
                               (UDisksISCSISession *proxy,
                                const gchar *arg_iface,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the LogoutInterface() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call udisks_iscsi_session_call_logout_interface_finish() to get the result of the operation.

See udisks_iscsi_session_call_logout_interface_sync() for the synchronous, blocking version of this method.

Parameters

proxy

A UDisksISCSISessionProxy.

 

arg_iface

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

callback

A GAsyncReadyCallback to call when the request is satisfied or NULL.

 

user_data

User data to pass to callback .

 

Since: 2.1.3


udisks_iscsi_session_call_logout_interface_finish ()

gboolean
udisks_iscsi_session_call_logout_interface_finish
                               (UDisksISCSISession *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with udisks_iscsi_session_call_logout_interface().

Parameters

proxy

A UDisksISCSISessionProxy.

 

res

The GAsyncResult obtained from the GAsyncReadyCallback passed to udisks_iscsi_session_call_logout_interface().

 

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.1.3


udisks_iscsi_session_call_logout_interface_sync ()

gboolean
udisks_iscsi_session_call_logout_interface_sync
                               (UDisksISCSISession *proxy,
                                const gchar *arg_iface,
                                GVariant *arg_options,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the LogoutInterface() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See udisks_iscsi_session_call_logout_interface() for the asynchronous version of this method.

Parameters

proxy

A UDisksISCSISessionProxy.

 

arg_iface

Argument to pass with the method invocation.

 

arg_options

Argument to pass with the method invocation.

 

cancellable

A GCancellable or NULL.

[nullable]

error

Return location for error or NULL.

 

Returns

TRUE if the call succeeded, FALSE if error is set.

[skip]

Since: 2.1.3


udisks_iscsi_session_skeleton_new ()

UDisksISCSISession *
udisks_iscsi_session_skeleton_new (void);

Creates a skeleton object for the D-Bus interface org.freedesktop.UDisks2.ISCSI.Session.

Returns

The skeleton object.

[transfer full][type UDisksISCSISessionSkeleton]


udisks_iscsi_session_complete_logout ()

void
udisks_iscsi_session_complete_logout (UDisksISCSISession *object,
                                      GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the Logout() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksISCSISession.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.1.3


udisks_iscsi_session_complete_logout_interface ()

void
udisks_iscsi_session_complete_logout_interface
                               (UDisksISCSISession *object,
                                GDBusMethodInvocation *invocation);

Helper function used in service implementations to finish handling invocations of the LogoutInterface() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.

This method will free invocation , you cannot use it afterwards.

Parameters

object

A UDisksISCSISession.

 

invocation

A GDBusMethodInvocation.

[transfer full]

Since: 2.1.3

Types and Values

UDisksISCSISession

typedef struct _UDisksISCSISession UDisksISCSISession;

Abstract interface type for the D-Bus interface org.freedesktop.UDisks2.ISCSI.Session.


struct UDisksISCSISessionProxy

struct UDisksISCSISessionProxy;

The UDisksISCSISessionProxy structure contains only private data and should only be accessed using the provided API.


struct UDisksISCSISessionProxyClass

struct UDisksISCSISessionProxyClass {
  GDBusProxyClass parent_class;
};

Class structure for UDisksISCSISessionProxy.

Members


struct UDisksISCSISessionSkeleton

struct UDisksISCSISessionSkeleton;

The UDisksISCSISessionSkeleton structure contains only private data and should only be accessed using the provided API.


struct UDisksISCSISessionSkeletonClass

struct UDisksISCSISessionSkeletonClass {
  GDBusInterfaceSkeletonClass parent_class;
};

Class structure for UDisksISCSISessionSkeleton.

Members

Property Details

The “abort-timeout” property

  “abort-timeout”            int

Represents the D-Bus property "abort_timeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “address” property

  “address”                  char *

Represents the D-Bus property "address".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: NULL


The “lu-reset-timeout” property

  “lu-reset-timeout”         int

Represents the D-Bus property "lu_reset_timeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “persistent-address” property

  “persistent-address”       char *

Represents the D-Bus property "persistent_address".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: NULL


The “persistent-port” property

  “persistent-port”          int

Represents the D-Bus property "persistent_port".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “port” property

  “port”                     int

Represents the D-Bus property "port".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “recovery-timeout” property

  “recovery-timeout”         int

Represents the D-Bus property "recovery_timeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “target-name” property

  “target-name”              char *

Represents the D-Bus property "target_name".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: NULL


The “tgt-reset-timeout” property

  “tgt-reset-timeout”        int

Represents the D-Bus property "tgt_reset_timeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0


The “tpgt” property

  “tpgt”                     int

Represents the D-Bus property "tpgt".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: UDisksISCSISession

Flags: Read / Write

Default value: 0

Signal Details

The “handle-logout” signal

gboolean
user_function (UDisksISCSISession    *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Logout() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_iscsi_session_complete_logout() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A UDisksISCSISession.

 

invocation

A GDBusMethodInvocation.

 

arg_options

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.

Flags: Run Last

Since: 2.1.3


The “handle-logout-interface” signal

gboolean
user_function (UDisksISCSISession    *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_iface,
               GVariant              *arg_options,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the LogoutInterface() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call udisks_iscsi_session_complete_logout_interface() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Parameters

object

A UDisksISCSISession.

 

invocation

A GDBusMethodInvocation.

 

arg_iface

Argument passed by remote caller.

 

arg_options

Argument passed by remote caller.

 

user_data

user data set when the signal handler was connected.

 

Returns

G_DBUS_METHOD_INVOCATION_HANDLED or TRUE if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED or FALSE to let other signal handlers run.

Flags: Run Last

Since: 2.1.3